Oshkosh Tamp Bar 10' 857 light
Handles for the Light, Heavy and Extra Heavy Tamp Bars are identical with only the thickness of the steel boot changing. Tampers are used to....
Oshkosh Tamp Bar 10' 1057 Heavy
Handles for the Light, Heavy and Extra Heavy Tamp Bars are identical with only the thickness of the steel boot changing. Tampers are used to....
OshKosh Cant Hook 4' 199A
Cant Hooks are made with hard maple handles and high-carbon steel hooks which are heat treated for ....
OSHKOSH 2050-10 DIGGER SPLIT
Split Handle and Solid Handle Post Hole Diggers. The blades are made of our special alloy steel. The blades are....
Oshkosh Pike Pole 818G 2.5" WITH GUARD
Pike Pole Oshkosh 818G 2.5" WITH GUARD
Pike Poles were designed to aid the practical person in the field using pole line tools. Pike Poles are used to pike or support a pole when setting in the field. The pike is made of special steel made of one piece with upset face which will take the force of the end thrust and distribute it over the entire end of the handle.
EXPANDING ANCHOR TOOL HUB C3020003
The Chance fiberglass handle Expanding and Tamping Bar simplifies the job of expanding anchors. The curved Expander and Tamper Head distributes the weight of the bar evenly around the anchor rod to reduce handle vibration. The hook of the Expanding and Tamping Bar wraps around the anchor rod to keep the expanding head from slipping off the anchor top plate. This tool is also effectively used for tamping in soil above the installed anchor. The base casting is attached directly to the fiberglass handle.
This is 10 ft long and will ship LTL freight.
C3020003 Expanding & Tamping Bar 10'
Stanley TA54103 Hydraulic Tamper with Valve
The TA54 Tamper is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600 blows per minute with a long 2-1/2 inch stroke for optimum compaction.The TA54103 furnished with a (3"x8")kidney shoe and an on/off control valve containing -8 SAE O-Ring ports that can be set up with port adapters, couplers, and/or hoses.This model is controlled by the operator at the tool.
operating range: 3-9 gpm (26-34 lpm)
preasure: 1,000-2,000 PSI