Pulling Harnesses "3 Way 1/8"" (6 mm) Cable" Condux 08549200

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "3 Way 1/4"" (6 mm) Cable" Condux 08549230

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses 4 Way 1/4" (6 mm) Cable" Condux 08549325

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "6 Way 1/4"" (6 mm) Cable" Condux 08549326

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "3 Way 3/8"" (6 mm) Cable" Condux 08549333

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Multiple Pulling Harnesses "4 Way 3/8" (10 mm) Cable" Condux 08549329

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "10 Way 3/8"" (10 mm) Cable" Condux 08549330

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "12 Way 3/8"" (10 mm) Cable" Condux 08549334

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "16 Way 3/8"" (10 mm) Cable" Condux 08549342

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "2 Way 1/2"" (13 mm) Cable" Condux 08549331

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "3 Way 1/2"" (13 mm) Cable" Condux 08549332

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling Harnesses "4 Way 1/2"" (13 mm) Cable" Condux 08549340

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Slingco heavy-duty, reusable dirt tarps have been created with safety in mind. Keeping workers out of awkward, injury-prone positions is better for their long-term health, and the company’s bottom line. Dirt tarps have become a must-have product at utility construction sites.

DIRT TARPS
7' x 7 ' Dirt Tarp SLINGCO ZLD10793
8' x 8 ' Dirt Tarp SLINGCO ZLD10016
10' x 10' Dirt Tarp SLINGCO ZLD10015

American Pneumatic tool tampers are available with a choice of three types of butts. This is a half moon shaped butt.

American Pneumatic tool tampers are available with a choice of three types of butts. 6" Round Butt internally reinforced.

American Pneumatic tool tampers are available with a choice of three types of butts. 3" Round Butt diameter solid.

The APT Model 131 Backfill Tamper is used for soil compaction, temporary filling of holes, ashphalt packing etc.

This lightweight 30 lb class Paving Breaker is an ideal tool for light to medium demolition work, as well as for use in confined areas.

Tough and dependable, the high performance Model 190 Paving Breaker or Jack Hammer is the most powerful tool American Pneumatic Tool makes.

ROCK DRILL M137 Chuck Size 7/8 x 3-1/4", 7/8 x 4-1/4" or 1 x 4-1/4"

The APT Model 137 Rock Drill is a versatile, mid-sized rock drill used in general construction, utility work and plant maintenance.

ROCK DRILL M155 Chuck Size 7/8 x 3-1/4", 7/8 x 4-1/4" or 1 x 4-1/4"

The APT Model 155 Rock Drill is a versatile, mid-sized rock drill used in general construction, utility work and plant maintenance. It is designed for drilling through granite, hard faced rock, quarry drilling and for drilling secondary holes for blasting. It can also be used in conjunction with dowel hole drilling machinery.
The Model 155 is adaptable to wet drilling by attaching the APT valve, wet tube and swivel assembly.
5229 -M155 ROCK DRILL 7/8 X 3-1/4", 5231 -M155 ROCK DRILL 7/8 X 4-1/4", 5233 -M155 ROCK DRILL 1 X 4-1/4"

Allows a wider range of  rope  diameters  to  be  used  with the Innerduct and Compressor seal-offs. Adapters specific for 3⁄16" (5 mm), 1⁄4" (6 mm), 3⁄8" (10 mm) diameter ropes provide optimum seal-off performance.

Allows a wider range of rope diameters to be used with the Innerduct and Compressor seal-offs. Adapters specific for 3⁄16" (5 mm), 1⁄4" (6 mm), 3⁄8" (10 mm) diameter ropes provide optimum seal-off performance.

Condux International 2" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 2 1/2" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 3" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 3" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 4" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 4" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately. Condux 08032965

Condux International 8" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately. Condux 08032975

Allows a wider range of  rope  diameters  to  be  used  with the Innerduct and Compressor seal-offs. Adapters specific for 3⁄16" (5 mm), 1⁄4" (6 mm), 3⁄8" (10 mm) diameter ropes provide optimum seal-off performance.

The Universal Seal-Off Control Valve Body is used with the Innerduct Seal-Off, Conduit Seal-Off,
& Double Seal-Off. Use the interchangeable heads for the style & size you need.
Comes equipped with an air flow valve and a universal hose coupling for attachment to most compressors. 3⁄16" (5 mm) rope adapter included.

Condux 08032181 Rope Adapter Kit, allows a wider range of rope diameters to be used with the Innerduct and Compressor seal-offs. Adapters specific for 3⁄16" (5 mm), 1⁄4" (6 mm), 3⁄8" (10 mm) diameter ropes provide optimum seal-off performance.

Condux International 6" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately. Condux 08032970

Multiple Pulling Harnesses "5 Way 1/4" (6 mm) Cable" Condux 08569910

Allows staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations.

Pulling eyes are designed with cutting edges to actually cut a thread in the bore of the ducting as it is....

Pulling eyes are designed with cutting edges to actually cut a thread in the bore of the ducting as it is....

Simple split nozzles provide easy connections between our cable feeders and the conduit being entered....

Complete Kit Hydraulic Auger MANTA LB-1 50093

MOIL POINT 18"UC X 11/4 X 6 BRUNNER & LAY #A44018 DELSTEEL
Stanley Hydraulic Tools Heavy Duty Moil Point 18" ( 45.7 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

CLAY SPADE 1 1/4 X 6 BRUNNER & LAY #B40400 1 1/4" X
Stanley Hydraulic Tools Clay Spade 8" ( 20.3 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Grime-Away™ wipes are heavy-duty towelettes premoistened with a multi-purpose cleaning solution. Grime-Away™ moisturizes and softens hands while cleaning tools and surfaces. ONE Individual presaturated 8" x 12" premoistened wipe.

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.

The Stanley TA54103 Hydraulic Tamp is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600 blows per minute with a long 2-1/2 inch stroke for optimum compaction.

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.