HUBBELL C3030045/S Shear Pin 50lbs (SURPLUS)
Pin for Shear Torque Indicator. Sold Each

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

Pulling Eye 1/2" - 1" Wagner Smith PE-1 6000lbs. PE-1 AUXILIARY PULLING EYE PENGO
30,000 LB. ULTIMATE BREAK STRENGTH

Auger Extension 3' GROU-EX3, Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.

Stanley Hydraulic Tools Heavy Duty Moil Point 18" ( 45.7 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements

Manta Ray Replacement (#50254) Force Gauge with Range Marking Sticker and (#50253) Coupler for
Manta LL-1 Load Locker. *REPLACEMENT PART ONLY*

MANTA LB-9054 50117 4" X 36" Auger Snap-On Extension

Ground Hog Pengo Drill 4" x 3'. Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements.

The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

Manta Ray 50424 SG-X Drive Steel Extractor Bar is used in conjunction with the LL-1 Load Locker to extract any drive steel that happens to get stuck underground.

MANTA 50655 SG-4HD HEAVY DUTY COUPLER

The Ground Hog SD12 Standard Auger has a standard-style digging head for loose/sandy soil condition. This 12" Auger uses a screw-in fishtail centered pilot and bolt-on wide flat, hardfaced, standard side blades. All Ground Hog Augers are approximately
38"(3') in length and utilize a 7/8" standard square drive for interchangeability between Earth Drills.
Feature:

• Part #100 Fishtail Pilot(1)
• Part #912 Side Blade Installed(1)
• Part #1300 Attachment Pin & Clips(1)
• 7//8" Square Drive for interchangeability
• Durable Powder-Coated Finished
• 12" hole diameter

1-1/8" hex x 6" shank, 15-1/2" OAL

1-1/4" hex x 6" shank,

The Ground Hog PSD8 Pengo 8" Auger features heat treated cast alloy steel boring heads with hardened forged steel side blades and a bolt-on cast alloy steel centered pilot bit. The Pengo Series augers are general purpose augers and are the best choice for tough soil conditions. All Ground Hog Augers are approximately 38"(3') in length and utilize a 7/8" standard square drive for interchangeability between Earth Drills.
Features:

• Part # SB-25 Pilot Bit(1)
• Part # 35 Side Blades Installed(2)
• Part # 1300 Attachment Pin & Chip
• 8" hole diameter
• 7//8" Square Drive for interchangeability
• Screw-in hardfaced alloy steel pilot bit
• Durable Powder-Coated Finish
• Replaceable Forged Steel Side Blades

Manta Ray 50233 SG-2, a 33" Drive Steel Extension is a
patented design made of high performance materials.

MANTA LB-4SSC 50102, 4 X 42" Auger with Carbide Tip for HDL-210 Replacement

Manta Ray HC-16-25, a 25' (7.6m) Hydraulic Hose with HTMA-3A Flush Face Coupler.

*Two are required for Manta Ray and/or Pole Puller Operations*

The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

Hubbell 630012HD Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2 5/8" (66.7 mm) Hex Kelly Bar

Hubbell 630013 Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2" (50.8 mm) Hex Kelly Bar

Stanley Hydraulic Tools Clay Spade 8" ( 20.3 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Hubbell E3030255 This tool bolts directly to the installer's output flange or Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle. Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.

6 1/2" BOLT 5 1/4 CENTER This is an attachment and goes with the Kelly Bar Drive End Wrench and the Kelly Bar Adapter to install anchors. The Locking dog weighs 20 pounds and is 7 inches high. C3030069HD

HUBBELL C3030045 Shear Pins 50lbs
Pin for Shear Torque Indicator. Sold in packs of 1,700

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

Hubbell C1021583 Anchor, Tool, Drive End Wrench, Orange Band, rated 10,000 ft-lbs, 7ft long

Anchor, Tool, Drive End Wrench, Yellow Band, rated 10,000 ft-lbs, 7ft long

Hubbell C3030983 Anchor, Tool, Drive End Wrench, Red Band, rated 15,000 ft-lbs, 7ft long

The SGC-14 drive steel kit, or a GADD set, will drive and install Manta Ray Anchors.
Designed for 1-1/4" x 6" chuck hammer/breakers

The C-71-5H Earth Drill is the work-horse of the Ground Hog line, tried and tested for over 30 years. Also known as an " Anchor Drill". This is a two man drill. Auger Bits sold separately.

Manta Ray 50172 LL-2. Light Duty Hand Pump.The LL-2 Anchor Locking kit is designed to Load Lock and proof test Small Manta Ray and Duckbill anchors.

Complete Kit Hydraulic Auger MANTA LB-1 50093

Out Of Stock

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications.

Manta Ray 50127 Hydraulic Control Valve and Plate LL-1. The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor.

Hubbell C3030044 Shear Pin Torque Limiter 6-Bolt, Anchor

18HP Arnco Power Pack TM351. Can be used with the Manta Ray Utility Anchor System.

REFURBISHED

The Manta 50382 Stanley GT18 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both type 1 and 2 hydraulic tools.

Hubbell C3031836 Digital Torque Indicator with Display

Digital Wireless Torque Indicator with wireless display

Complete setup to drive a Manta Ray anchor into the ground. When pulled the Manta Ray will lock horizontally into the ground never coming loose. One of the best ways to assemble a down guy.

REFURBISHED USED