ROUND WASHER 1-3/8" DIA. 9/16 HOLE H-J1086

• Constructed of high quality steel, hot-dip galvanized
• 1-3/8" DIA. 9/16 HOLE
• can be used with J8245 drop hook for wood crossarms
  
• 1000 PER CARTON
  

P HOUSE HOOK 4 1/2" H-922

J hooks are used for supporting bail-type drop wire and deadend clamps from poles and crossarms.

House Hook 3-3/4" P H-921

• Designed to secure CATV drop cable to the side of a subscriber's house by either accepting the bail of drop wire clamps, or by wrapping the support wire of drop cable around the screw eye.
  
• Manufactured from AISI 1016 Steel.
  
• P House Hooks are mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Rams Horn Drop Wire Hook Install with 5/16" lag screw H-5519

• Specially shaped hook for attaching drop wire clamps or drop wires to houses
• Constructed of high quality steel, mechanically plated
Rams Horn Drop Wire Hook H-5519

J Hook 7/16" x 4 3/4" J3316P

J hooks are used for supporting bail-type drop wire and deadend clamps from poles and crossarms.

Guy Hook (Pig's Ear) 2" x 3/16" 11/16 Hole J25164

Guy hook attachment, attaches to pole with machine bolt. Dead-end attaches to the guy hook though the loop. Also called a Pigs Ear. Guy Hook (Pig's Ear) 2" x 3/16" J25164 11/16 Hole

Mid-Span Clamp H-5577

Used for mid-span drop wire take-offs in one or more directions for either lashed or self-supported cable

Will hold cable away from obstacles in the line of aerial construction

Designed for use with "p" type or Wirevise drop hardware

h-5577

ANGLED SINGLE STRAND EYELET 3/4" H-J65034/ALL2061

Guy Hook Ramshead Combo Type with Spurs H-22001

• Used to terminate guy wires or fiberglass guy strain insulators.
• Mounting hole in heel and center mounting hole accommodate 5/8" bolts.
  
• Forged from Ductile Iron.
• 45 degree Ultimate Tensile strength 21,000 lbs.
  
• Designed for use on round or flat surfaces.
  
• Hot dip galvanized to meet ASTM Specification A153.

Ramshead with Spurs Combo H-22001 with 11/16" 5/8" mounting holes

Guy Hook 5 1/2" For 3/4" Hardware P133AX

5 1/2" length for use with 3/4" hardware
They provide an efficient and economical attachment for down guys.

Guy Hook (J-Hook Type) H-J1019

Guy hook attachment, attaches to pole with machine bolt. Dead-end attaches to the guy hook over the hook. Used in tandem, on opposite sides of the pole, to prevent guy strand from slipping on the pole

Hook Bolt Guard Arm 1/2" x 5 3/4" J8245

The hook bolt guard arm bolts though the side of a wood crossarm for deadending telephone services and drops. Use with J1086 round washer.

Guy Hook 4 1/2" For 5/8 Hardware P135AXW

4 1/2" length for use with 5/8" hardware. They provide an efficent and economical attachment for down guys.

Thimble Clevis 5/8" H-J555

ANGLE THIMBLE EYELET 5/8" J6500

Angle Thimble Eyelets
Catalog Number	Bolt Diameter (Inches)	Max Strand	Weight/100 (lbs)
J6500	5/8	1/2	127

ANGLE THIMBLE EYELET H-J6500

Thimble Clevis Preformed TC-5F

THIMBLE CLEVIS GALVANIZED DUCTILE IRON for E-1 LINK
Thimble Clevises are used in conjunction with PREFORMED Dead-ends on suspension-type or Dead-end insulators. The thimble is intended to provide a smooth internal contour to prevent stress concentration within the loop of a PREFORMED Dead-end. The 15/16" inside width Clevis includes a 2-15/16 x 5/8 steel pin which links it through the eye of an insulator and secures it with a humpbacked cotter key. 26,900 Lbs

Guy Hook Ramshead 1" H-G864X2-ALL5094

1" C GUY HOOK.Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications.Recessed bolt hole to accept head of Square Head Machine Bolts. Features a wide inner shoulder and broad heel pad to resist embedding. Features “chisel point” spurs to resist down slotting in pole. Cannot be used in “back to back” guying on pole.Forged from Ductile Iron.Hot dip galvanized to meet ASTM Specification A153.

Guy Hook Ramshead 1" H-G864X2-ALL5094

Guy Hook Ramshead Combo Type w/o Spurs H-22001LT

• Used to terminate guy wires or fiberglass guy strain insulators.
• Mounting hole in heel and center mounting hole accommodate 5/8" bolts.
  
• Forged from Ductile Iron.
• 45 degree Ultimate Tensile strength 21,000 lbs.
  
• Designed for use on round or flat surfaces.
  
• Hot dip galvanized to meet ASTM Specification A153.

Ramshead without Spurs Combo H-22001LT with 11/16" 5/8" mounting holes

Adsco 3/4" Stainles Steel Guy Hook GH34

Stainless Steel Adsco Heavy Duty Guy Hook GH34

• Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications.
• Features a wide inner shoulder and broad heel pad to resist embedding
• Cannot be used in “back to back” guying on pole.
• Mounting Bolts 3/4"

Adsco 5/8" Stainless Steel Guy Hook GH58

Stainless Steel Adsco Heavy Duty Guy Hook GH58

• Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications.
• Features a wide inner shoulder and broad heel pad to resist embedding
• Cannot be used in “back to back” guying on pole.
• Mounting Bolts 5/8"

Adsco 3/4" Stainless Steel Heavy Duty Guy Hook GH2

Stainless Steel Adsco Heavy Duty Guy Hook GH2

• Two Spurs to Resist Pole Splitting
• More Surface in Contact with Pole than other Comparable Guy Attachments – Greater Protection to Wood Fibers
• For Round or Flat Surfaces
• Will intercept Wire at any Angle
• Mounting Bolts TOP- 1" - 7/8", BOTTOM- 3/4" - 5/8", AND/OR 1/2" L.S.

Banded guy Attachment with Clevis Aluma-Form BGA-100

Banded guy used With 1-1/4" band Two buckles required for all banded brackets and attachments

Deadend Tee 1-1/4", Flat Back HUBBELL PSC2030508

Deadend tees are a high tension attachment used on pole, crossarms or bracing for connections to clevices, shackles, insulators and other attachment hardware.

• 60,000 lbs. minimum ultimate tensile strength
• 1-1/4" chamfered stem hole
• 13/16" mounting holes spaced 6"
• Forged steel galvanized per ASTM A-153

Banded Guy Attachment For 1 1/4 Band Aluma-Form BGA-S20

Heavy Duty Banded Guy Attachment Cast Steel for 1-1/4" Banding.

Banded Guy attachment with Clevis Aluma-Form BGA-S25

Aluma-form BGA-S25 Extra-Heavy Duty Banded Guy attachment with Clevis