Aluminum Aerial Cable Wind Damper Allied Bolt 9081

Used to support CATV and telephone cables from the strand. The end of the strap is tapered to provide easy installation into...

Figure 8 Span Clamp (.109"-.134") Allied Bolt 7023

• Used in drop cable installations as an attachment to figure 8 cable for accepting the bail of Drop Wire Clamps.
  
• Jaws are extruded and stamped from 5052 H-34 Aluminum.
  
• Clamp is comprised of a specially shaped bolt, two aluminum jaws, and a square nut.
  
• Bolt and nut are formed from Grade 2 Steel.
  
• Bolt and nut are hot dip galvanized to meet ASTM Specification A153, Class B3.

3-1/2" S PIPE STRAP Allied Bolt 744

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag screw recommended:

Lag Screw GIMLET POINT 1/2 1/4X 2-1/2"

3" PIPE STRAP Allied Bolt 769

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag Screw recommended:

LAG SCREW GIMLET POINT 1/2 1/4X2-1/2"

H-769 Pipe Strap, for 3" inside diameter pipe

4" PIPE STRAP Allied Bolt 770

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag Screw recommended:

Lag Screw GIMLET POINT 1/2 1/4X 2-1/2"

4.5" PIPE STRAP Allied Bolt 771

• Used for attaching a vertical pipe duct to telephone poles or other curved surfaces.
  
• Manufactured from AISI 1018 Steel.
  
• Legs of clamp are offset 20° for easy assembly on curved surfaces.
  
• Mounting hole is 7/16".
  
• Stock size is .250" x 1".
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
• Lag Screw recommended:

Lag Screw GIMLET POINT 1/2 1/4X 2-1/2"

Two Hole Clamp 1-1/4" H-9000-200

• Used to secure cable, pipe, and conduit to various surfaces.
  
• Stamped from AISI 1018 Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 11 H-9003-11 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accomodates 11/16" diameter cable 1/2" conduit.
  
• Mounting holes accomodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 11 H-9003-11
Priced per pack of 25

Strap Cable Size 13 H-9003-13 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
• Accomodates 13/16" diameter cable.
• Mounting holes accomodate 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 11 H-9003-13

Priced per pack of 25

Strap Cable Size 16 H-9003-16 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
• Accomodates 1" diameter cable or 3/4" conduit.
• Mounting holes accomodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 11 H-9003-16

Priced per pack of 25

Strap Cable Size 20 H-9003-20 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accomodates 1-1/4" diameter cable or 1" conduit.
  
• Mounting holes accomodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 20 H-9003-20

Priced per pack of 25

Strap Cable Size 24 H-9003-24 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accommodates 1-1/2" diameter cable or 1-1/4 conduit.
  
• Mounting holes accommodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 24 H-9003-24

Priced per pack of 25

Strap Cable Size 30 H-9003-30 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accomodates 1-7/8" diameter cable or 1.5" EMT conduit.
  
• Mounting holes accomodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 24 H-9003-30

Priced per pack of 25

Strap Cable Size 36 H-9003-36 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accommodates 2-1/4" diameter cable or 2" pipe.
  
• Mounting holes accommodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 36 H-9003-36

Priced per pack of 25

Strap Cable Size 42 H-9003-42 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accommodates 2-5/8" diameter cable or 2" rigid pipe.
  
• Mounting holes accommodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 42 H-9003-42

Priced per pack of 25

Strap Cable Size 56 H-9003-56 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accommodates 3-1/2" diameter cable OR 3" CONDUIT .
• Mounting holes accommodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 56 H-9003-56

Priced per pack of 25

Strap Cable Size 64 H-9003-64 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accomodates 4" diameter cable.
• Mounting holes accomodate 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 64 H-9003-64

Priced per pack of 25

Strap Cable Size 9 H-9003-9 25pk

• Used to attach conduit, pipe, and cable to telephone poles and other surfaces.
  
• Legs have a 5° offset for making attachments to round surfaces.
  
• Accommodates 9/16" diameter cable.
• Mounting holes accommodates 1/4" screws.
  
• Stamped from a thinner gauge (more pliable) Steel than Two Hole Clamps.
  
• Cable size is stamped on each strap.
  
• Stamped from AISI 1018 Cold Rolled Steel.
  
• Mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Strap Cable Size 9 H-9003-9

Priced per pack of 25

Cable Guard Strap size 2-3/8" H-J996

Pole Strap Galvanized 1" H-EMC 50-1USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-1USPHD Riser Cleat

Pole Strap Galvanized 2" H-EMC 50-2USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"
H-EMC-50-2USPHD Riser Cleat

Pole Strap Galvanized 3" H-EMC 50-3USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-3USPHD Riser Cleat

Pole Strap Galvanized 4" H-EMC 50-4USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50- 4USPHD Riser Cleat

Pole Strap Galvanized 5" H-EMC 50-5USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-5USPHD Riser Cleat

Pole Strap Galvanized 6" H-EMC 50-6USPHD

Features:

• 9/32" hole size.
• Thickness – 12 gauge.
• Hot dip galvanized after forming.
• Lag Screw recommended:

Lag Screw Hex Head 1/4"X2-1/2"

H-EMC-50-6USPHD Riser Cleat

VISE TYPE BONDING CONNECTOR HUB GC-164 BRONZE

For connecting ribbon or braid to ribbon, braid or bus.
Side Opening Jaw facilitates easy installation.

Run Conductor Size and Type	Cu ribbon 1/4", Cu braid 1/4"
Tap Conductor Size and Type	Cu 6 sol, Cu 6 str (7), Cu ribbon 1/4", Cu braid 1/4"

Klein 85091 Power Conduit Reamer Drill Head

Ream 1/2'', 3/4'' and 1'' conduit and install fittings in a fraction of the time. Reduce time on projects....

Heavy Duty Cable Tie 16" Safety Strap Buckle w/Stainless Steel Locking Barbs PLP 80808917 (Pk of 25)