Slingco’s Hand Line Blocks feature a 3" nylon fiberglass block, with a safe working load limit of 1,000 lb.

3" Hand Line Blocks sheave can accommodate a 5/8" diameter rope, and operates smoothly on the 1/2" diameter axle and swivel bearings. The side opening feature allows quick access to remove the hand line.

Drop Side Snatch Blocks, 1 Wheel, 4,000 lb, 3/8 in Cable, Shackle - 7339752

• Model 4099
• For Wire Rope
• Steel Shell with Steel Sheaves
• Drop-Forged Fittings
• 3" & 4-1/2" Blocks Have Bronze Self-Lubricating Bushings; 6" Have Grooved Bronze Bushings with Pressure Grease Lubrication
• Galvanized Finish
• Special Feature: the Bolt Cannot Be Lost When the Block is Opened
• Connections Are Easily Interchangeable
• Working Loads are Resultant Working Loads
• DO NOT EXCEED THE WORKING LOAD LIMIT

Drop Side Snatch Block - Swivel Hook with Latch “V” - 4 ton - 7339764

• Model 4099
• For Wire Rope
• Steel Shells with Steel Sheaves
• Drop-Forged Fittings
• 3" & 4-1/2" Blocks Have Bronze Self-Lubricating Bushings; 6" Have Grooved Bronze Bushings with Pressure Grease Lubrication
• Galvanized Finish
• Special Feature: the Bolt Cannot Be Lost When the Block is Opened
• Connections Are Easily Interchangeable
• Working Loads are Resultant Working Loads
• DO NOT EXCEED THE WORKING LOAD LIMIT

Snatch Block - 6" - Steel, Eastern Safety Lock - 3000 lb for Manila Rope w/Latch “V" - COOPER 7268796

• Model 3075V - Steel Shells
• Bronze Self-Lubricating Bushings
• Drop-Forged Fittings and Galvanized
• Working Loads are Resultant Working Loads
• DO NOT EXCEED THE WORKING LOAD LIMIT

The Buckingham OX BLOCK™50061 rope snatch block with an integrated friction bar is used for hurtman rescue, lowering loads, snubbing loads, and raising loads. Allows the rigging professional to handle loads with greater control and when lowering loads, tension is transferred from worker to the Ox Block

Frame is high strength aluminum alloy with sheave mounted on anti-friction ball bearings for stringing overhead ground wire.
Max Wire OD 3/4" with Max Load of 3,000lbs.

8" Aerial Buddy fiber optic sheave is recommended for straight pulls. Jameson's Aerial Buddy is designed to protect ADSS cable and other jacketed fiber during installation.

24" Aerial Buddy fiber optic sheave is recommended for set up, take down and turns. Jameson's Aerial Buddy is designed to protect ADSS cable and other jacketed fiber during installation.