Fiber Optic Cable Lubricant Qt Squeeze Bottle POLYWATER F-35
Includes: 1-qt squeeze bottle (.95 l)
Polywater® Lubricant F is a high performance, pourable liquid lubricant
recommended for long, difficult, lightguide cable pulls. It is slow drying and
leaves a lubricating film after its waterbase has evaporated. Polywater® Lubricant
F will not stress crack low density polyethylene. It is compatible with
all common* types of cable jackets.
Communications Pourable Lubricant POLYWATER CPL-128
Includes:1-gallon (3.8 liter) jug
Polywater® Lubricant CPL is a high performance, pourable liquid cable
pulling lubricant for long fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CPL provides maximum friction reduction
between cable and conduit under both low and high sidewall bearing
pressures. It is slow-drying and leaves a lubricating film after its water
base has evaporated. Polywater® CPL is a liquid lubricant and can be
applied by pouring into an up-turned duct or funnel.
Polywater® Lubricant CPL is safe for the aquatic environment. It meets
California regulation CCR 22. Polywater® CPL is suitable for use on PE
communication cable jackets.
Polywater® WCPL (winter grade) has the same characteristics
as Polywater® CPL and is specially formulated for use in
temperatures as low as -20°F (-30°C).
Fiber Concentrated Liquid Lubricant POLYWATER FTTX-35LR
Includes: 1-quart (.95 liter) bottle with sprayer.
Polywater® FTTx Fiber Lubricant makes the installation of fiber drops easy.
The lubricant is concentrated, only a thin film is required for immediate tension
reduction that lasts even as the lubricant dries. Spray or wipe the cable or conduit.
Quick and easy to use without mess or excess lubricant.
Perfect for Fiber Optic Drops
Non-Staining, Quick Clean-Up
Easy Application with Spray or Wipe
Lubricates with Very Thin Film, Performs After Drying
Compatible with Common Cable Jackets – Including Polyethylene
Helps Prevent "Wet Link" Insertion Loss in Category 6 Data Cables
Polywater® FTTx Lubricant is easy to apply. It can be sprayed into conduit
or wiped onto cable, making the installation of multiple drops quick and convenient.
Use Polywater® FTTx to insure fast installation without mess.
Our Price: $14.52
SALE Price: $12.82
You save $1.70!
Communications Gel Lubricant POLYWATER CGL-128
Includes: 1-gallon (3.8 liter) pail
Polywater® Lubricant CGL is a high performance, gel cable pulling for
fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CGL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated.
Polywater® CGL is a gel material and can be applied by hand or using Polywater’s LP Pumps.
Polywater® Lubricant CGL is safe for the aquatic environment. It meets California regulation
CCR 22. Polywater® CGL is suitable for use on PE and low-smoke zero-halogen
(LSZH) communication cable jackets.
Polywater® WCGL (winter grade) has the same characteristics as Polywater® CGL
and is specially formulated for use in temperatures as low as -20°F (-30°C).
Fiber Optic Cable Lubricant POLYWATER F-128
Includes: 1-gallon jug .
Polywater® Lubricant F is a high performance, pourable liquid lubricant
recommended for long, difficult, lightguide cable pulls. It is slow drying and
leaves a lubricating film after its waterbase has evaporated. Polywater®
Lubricant F will not stress crack low density polyethylene. It is compatible with
all common* types of cable jackets.
Polywater® Lubricant WF (winter grade) has the same characteristics
as Polywater® Lubricant F and is specially formulated for use in temperatures
as low as -20°F (-30°C).
Communications Pourable Lubricant POLYWATER CPL-640 5gal bucket
Includes: ONE 5-gallon (18.9 Liter) pail
Polywater® Lubricant CPL is a high performance, pourable liquid cable pulling
lubricant for long fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CPL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated. Polywater® CPL
is a liquid lubricant and can be applied by pouring into an up-turned duct or funnel.
Polywater® Lubricant CPL is safe for the aquatic environment. It meets
California regulation CCR 22. Polywater® CPL is suitable for use on
PE communication cable jackets.
Polywater® WCPL (winter grade) has the same characteristics as
Polywater® CPL and is specially formulated for use in
temperatures as low as -20°F (-30°C).
Polywater® CGL-640 Gel Communications Cable Pulling Lubricant
Includes: ONE 5-gallon (3.8 liter) pail.
Polywater® Lubricant CGL is a high performance, gel cable pulling for
fiber optic, copper or coaxial cable pulls.
Polywater® Lubricant CGL provides maximum friction reduction between cable
and conduit under both low and high sidewall bearing pressures. It is slow-drying
and leaves a lubricating film after its water base has evaporated.
Polywater® CGL is a gel material and can be applied by hand or using Polywater’s LP Pumps.
Polywater® Lubricant CGL is safe for the aquatic environment. It meets California regulation
CCR 22. Polywater® CGL is suitable for use on PE and low-smoke zero-halogen
(LSZH) communication cable jackets.
Polywater® WCGL (winter grade) has the same characteristics as Polywater® CGL
and is specially formulated for use in temperatures as low as -20°F (-30°C).
Polywater® Lubricant CGL is also a superior pulling lube for pulling power wire/cables into all types of conduit.
Fiber Optic Cable Lubricant POLYWATER F-640
Fiber Optic Cable Lubricant POLYWATER F-640.
Includes: 5-gallon pail (18.9 l)
Polywater® Lubricant F is a high performance, pourable liquid
lubricant recommended for long, difficult, lightguide cable pulls.
It is slow drying and leaves a lubricating film after its waterbase has
evaporated. Polywater® Lubricant F will not stress crack low
density polyethylene. It is compatible with all common types of cable jackets.
Polywater® Lubricant WF (winter grade) has the same characteristics
as Polywater® Lubricant F and is specially formulated for use in
temperatures as low as -20°F (-30°C).