2" RIGID Pipe, SIDEWALK GUY PIPE H-2.0"x 10' REPUBLIC
2" RIGID PIPE STICK IS 10 ft. USED FOR RISERS, SERVICE ENTRANCES, QUEENSPOST PIPE. Queens Post Pipe
Pipe size: 2" rigid with one threaded coupler. Where there is insufficient space for standard guying and where head clearance must be maintained used as a queen's post pipe. 37lbs. one10ft.stick.
" Must Ship LTL Freight"
-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
2-1/2" RIGID Pipe, SIDEWALK GUY PIPE H-2.5"x 10' REPUBLIC
2-1/2" RIGID PIPE STICK IS 10 ft. USED FOR RISERS, SERVICE ENTRANCES, QUEENSPOST PIPE. Queens Post Pipe
Pipe size: 2.5" rigid with one threaded coupler. Where there is insufficient space for standard guying and where head clearance must be maintained used as a queen's post pipe. 37lbs. one10ft.stick.
" Must Ship LTL Freight"
-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
3" RIGID Pipe, SIDEWALK GUY PIPE H-3"x 10' REPUBLIC
3" RIGID PIPE STICK IS 10 ft. USED FOR RISERS, SERVICE ENTRANCES, QUEENSPOST PIPE. Queens Post Pipe
Pipe size: 3" rigid with one threaded coupler. Where there is insufficient space for standard guying and where head clearance must be maintained used as a queen's post pipe. 37lbs. one10ft.stick.
" Must Ship LTL Freight"
-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
PERFECT FIT 2" END FITTING KIT-J0522 GUY CLAMP - J1075 FLAT WASHER
J0522 cap uses two J-1075 washers for a perfect fit for capping off pipe, creating an end fitting. The J0522 cast iron fittings are used with standard 2" galvanized pipe. 2-EA. Square Washer J1075 Iincluded Galvanized 2 1/4" x 2 1/4" x 3/16" with 11/16" hole diameter and 5/8" bolt diameter.
Sidewalk Guy Clamp End J0522 Pipe size: 2" & 2-1/2" requires J931
These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained.The J0522 end fitting requires a J931 guy clamp which must be ordered separately.
Sidewalk Guy Clamp End J1502 Pipe size: 2"
These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained.
Sidewalk Guy Pole Plate J1501 Pipe size: 2"
These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained.
