Gulfstream 400 Fiber Optic Cable Blower Package 1A
(includes Cable Packs # 1-4, and Duct Packs #2-5)

Extremely easy to transport, the blower and all accessories
conveniently fit into a lightweight job box with wheels.

Designed for the installation of fiber optic cables with diameters from
0.23" (5.8 mm) to 1.13" (28.7 mm) into microduct.
Order Duct and Cable Packs separately, to ensure the
correct size for your needs.

Condux 08785000 Mobiliar M17 Air Compressor with Aftercooler / Air Conditioner, with 220psi 35cfm is a rugged and dependable unit that is perfect for variety of applications with a folding handle, oversized pneumatic tires, and compact compact design, this unit is easy to move around virtually any job-site. The M17 features Kaeser's power saving Sigma Profile airend.

This portable power source is matched perfectly to the requirements for the Condux Fiber Optic Cable Blower and Puller. Utilizing a small footprint, the 13hp Power Pack features a variable flow switch (from 5gpm to 8gpm) to ensure that every job can be covered with just one machine.

Condux 08675700 Portable Hydraulic Power Pack 9HP (5.9 GPM @ 1800 PSI)
These portable power sources are matched perfectly to the power requirements of the Condux Fiber Optic Cable Puller and the Fiber Optic Cable Blower. Power source is a 9 HP (6.7 kW) Honda (gas), or a 16 HP (11.9 kW) Briggs & Stratton V-Twin Vanguard (gas) engine. Features electric start, large capacity hydraulic cooler, quick disconnects, low oil shut-off and 16" (406 mm) diameter pneumatic tires.

The 250CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine.Features a heavy-duty moisture separator and coalescing filter to trap moisture and condensed oil.

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780375
• Duct Seal - Part No. 08780051
• Carrier - Part No. 08761255
• Foam Carrier - Part No. 08761440
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761842

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780404
• Duct Seal - Part No. 08780398
• Carrier - Part No. 08761260
• Foam Carrier - Part No. 08761441
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761844

Each duct pack comes with:

• Duct Clamp - Part No. 08780369
• Duct Seal - Part No. 08780307
• Carrier - Part No. 08761250
• Foam Carrier - Part No. 08761439
• Cable Grip - Part No. 08643137
• Innerduct Eye - Part No. 08761842

Each duct pack comes with:

• Duct Clamp - Part No. 08780682
• Duct Seal - Part No. 08780685
• Carrier - Part No. 08780690
• Foam Carrier - Part No. 08078300
• Cable Grip - Part No. 08643137
• Innerduct Eye - Part No. 08761840

Each duct pack comes with:

• Duct Clamp - Part No. 08780791
• Duct Seal - Part No. 08780786
• Carrier - Part No. 08780793
• Foam Carrier - Part No. 08078300
• Cable Grip - Part No. 08643131
• Innerduct Eye - Part No. 08761840

CONDUX 08764130 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

CONDUX 08764140 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):10mm
Innerduct Eye ID Range:5-9mm

Includes

CONDUX 08764150 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):12.7mm

CONDUX 08764110 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Condux 08764143 Seal, Inner-Duct
Duct OD: 0.39" (10mm)

Clamp, Inner-Duct
Duct OD: 0.39" (10mm)

Box includes:

• Push-On Retainers
• Disc Carriers
• Loctite
• Calipers

Condux 08676861, Speed Ball Insert Innerduct Split Coupling 1.50"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.50" (38 mm)
• Duct Type: 1-1/2" SDR 11, 13.5
• Mean Duct OD: 19.00" (48 mm)

Condux 02290222, Black Molded Case with foam insert for Fiber Optic Cable Blower and/or Insertion gun.

Condux 08676862, Speed Ball Insert Innerduct Split Coupling 2.00"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 2.00" (61 mm)
• Duct Type: 2.00" SDR 11, 13.5
• Mean Duct OD: 2.375" (60 mm)

Condux 08676860, Speed Ball Insert Innerduct Split Coupling 1.25"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 1.25" (32 mm)
• Duct Type: 1 1/4" SDR 11, 13.5
• Mean Duct OD: 1.660" (42 mm)

Condux 08037534 Flexible Leader for 9/16" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 9/16"
USC Thread: 3/4-10 Thread 24" Long

Condux 08676859, Speed Ball Insert Innerduct Split Coupling 1.00",

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Size: 1.00" (25 mm)
• Duct Type: 1" SDR 11 & 13.5
• Mean Duct OD: 1.315" (33 mm)

Condux 08676863, Speed Ball Insert Innerduct Split Coupling 40mm

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.575" (40 mm)
• Duct Type: 40 mm
• Mean Duct OD: 1.575" (40 mm)

Condux 08037538 Flexible Leader for 3/8" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 3/8"
USC Thread: 3/8-16 Thread 24" Long

Condux 08761426 Cable Seals 0.49" - 0.55" , replacement cable seals  for Condux Fiber-Optic Cable Blowers are sold in packs of four. These cable seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini-Blower/Pusher.

Condux 08761425 Cable Seals 0.43" - 0.48", replacement cable seals for Condux FIber-Optic Cable blowers are sold in
packs of four.These seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini Blower/Pusher.

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.23"-0.28" (7.3-8.8)

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.29"-0.34" (7.3-8.8)

Condux 08037401 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:

• US Duct Rod Diameter: 7/16"
• USC Thread: 3/8" - 16"
• Duct Range ID: 2.5-6"

Condux 08035752 5/16" Roller Guide, helps guide the duct rod around bends, sweeps, and duct misalignment. also used when the conduit is already occupied by cables.
Specifications:

• US Duct Rodder Diameter: 1/4"
• USC Thread: 5/16-18
• Duct Range ID: 1.00 - 2.50"

CONDUX 08780126 O-Ring Seal Kit for Gulfstream™ 400

Condux 08032600 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 4" (102 mm)
Max. OD: 4.00" (102 mm)

Condux 08780223 Venturi Air Plug Seal Disk, blocks the the backward flow of air on the Condux Fiber-Optic Cable Blower while the user is conducting pressure tests and/or applying pre-lubricant in duct. The Seal disk is also used in conjunction with the Winch Line Blower when installing polyester pull tape.

Condux 08761442 Foam Carrier, is specially designed for spreading lubricant in duct prior
to fiber-optic cable blowing/jetting.
Specifications:

• Carrier Size: 2.00" (50.8 mm)
• Duct Range (Inside) Diameter: 2.00" SDR 13.5, 11 (46 - 52 mm)

Condux 08032500 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 3" (76 mm)
Max. OD: 3.00" (76 mm)

Condux 08761440 Foam Carrier, is specially designed for spreading lubricant in duct prior to fiber-optic
cable blowing/jetting.
Specification:

• Carrier Size: 1.50" (38.1 mm)
• Duct Range (Inside) Diameter: 1.25" (30-39 mm) SDR 13.5", 11