Box of 100ea.
3M Scotchlok Insulation Displacement Connector (RED) 19-26AWG
The UR connector accepts two or three solid copper conductors for butt splicing. The connector is filled with a sealant to provide moisture resistance. RUS Listed.

Used for making medium weight (under 250 lbs.) attachments such as cable clamps, ground blocks, terminals, ONI’s, protectors, etc. to concrete, hollow block, solid block, and brick.
**BOX of 100 pcs w/3/16"x1/2" DRILL-BIT**

ALUMINUM GROUNDING LUG

• Used to mechanically bond ground wire to equipment.
• One hole on front of connector for attaching ground wire.
• Accepts ground wire ranging from #14 - #4 AWG
• Mounting hole accommodates 1/4" stud.
• Body constructed from high strength Aluminum.
• Set screw is installed with a flat head screwdriver.

WAL MINMED70 RIGID STRAP MINRLAC MED-70 1H COND ONE HOLE STRAP 1.25" MINERALAC

MSI SI-2168C(meter box clamp) Clamp
Connector: Bonding Corner for Metter Box and Wire.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

An excellent long-term seal, these products can be installed in minutes without the use of specialized tools and can be easily removed at any time. Wedge Seals are available in a variety of off-the-shelf and custom sizes and can handle one, three and four-way cable and duct arrays with cable OD’s ranging from 3/4 to 2.7 Inches.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Cal Am Wedge Seals provide a quick and easy-to-use system to protect and organize acts and cables for fiber optic, telecommunications and electrical application.

Antenna Mount Spacer 4.5" Galvanized Spacer 1" x 4-1/2"

Hoffman A12R124 steel enclosure,wall mount,Type 3R,Screw Cover,12" X 12" X 4",
color gray.

Hoffman A12R124 steel enclosure,wall mount,Type 3R,Screw Cover,12" X 12" X 4",
color gray.

Wire Trough, Type 3R, Bulletin F40PT (Galvanized Painted Type 3R Wiring Trough), Size/Dims: 4" x 4" x 18", Material/Finish: Galv/paint.

Pull Box, Screw Cover / KO's, Bulletin A90P1 (Pull Boxes Type1),
Size/Dims: 12" X 12" X 6", Material/Finish: Steel/Gray.

Hoffman Screw cover enclosure in ANSI 61 gray color, is suitable for use in outdoor applications as wiring or junction box. It features 16-/14-/12-gauge steel construction and has galvanized polyester powder-paint finish.

Hoffman A4418RT Polyester Powder Coated 16 Gauge Steel Wiring Trough 18" X 4" X 4" ANSI Gray
Hoffman Wiring trough features 16-gauge steel construction with ANSI 61 gray polyester powder paint finish for corrosion resistance. Wiring trough measures 4-Inch x 4-Inch x 18-Inch. It has NEMA 3R rated slip-on enclosure with embossed mounting holes on back side. It has IP32-degree of protection. Wiring trough is UL listed, CSA/IEC certified and RoHS compliant

Hoffman A24R2424NK12 NEMA 3R Polyester Powder Coated Galvanized Steel Pad-lockable Slip-on Screw Cover Enclosure 24" X 24" X 12" ANSI 61 Gray

• Constructed of high quality steel, hot-dip galvanized
• 1-3/8" DIA. 9/16 HOLE
• can be used with J8245 drop hook for wood crossarms
  
• 1000 PER CARTON
  

ROUND WASHER 2" DIA. 13/16 HOLE H-J1089. Galvanized for 3/4" Bolts

• Constructed of high quality steel, hot-dip galvanized

MAST CLAMP WIRE HOLDERS Holds incoming service entrance cables Material: Porcelain Wire Holder, Adjustable Galvanized Steel Clamp

Minerallac Jiffy Clip® Traditional Series 1-Hole Medium-duty strap of trade size 2-inches, features snap-on design for secure and easy installation

Minerallac 600 Steel Set Screw Beam Clamp 1/4-20 Rod 1/2-Inch Jaw Opening Zinc Plated

Minerallac Jiffy Clip® Traditional Series 1-Hole Medium-duty strap of trade size 2-inches, features snap-on design for secure and easy installation.

Crouse-Hinds RE63 Feraloy® Iron Alloy Explosionproof Dust-Ignitionproof Reducing Bushing 2-Inch x 1-Inch

Crouse-Hind CRHK200S Steel Conduit Body Cover 2".
SCREW INSTALLATION, SIZE 2 INCH.

2" aluminum conduit body. Includes cover and gasket.

Hanger Bolt, Plain Center, 3/8-Inch diameter by 3-Inch length size, Steel material.

Polyurethane; 12 Oz Container Size; Application Electrical, Plumbing, Air Conditioning,
Refrigeration; Features Moisture Cure Polyurethane Foam to Seal, Bond, Retrofit,
Insulate and Deaden Sound, Expands 2 to 3 Times Extruded Bead and is rated R-5
for each inch of foam.

The L.H. Dottie HN38 Hex Nut, Finished, 3/8-inch-16 TPI is made of steel,
For general use.

L.H. Dottie Anchor kit includes 50 Phillips/slotted screws made of sheet metal and 50 red color anchor of size 23. Screw measures 1-1/2 Inch and inludes 1/4-Inch drill.

Tap Bolt, Full thread, 3/8-Inch-16 TPI by 1-Inch length size, 9/16-Inch Hex,
Grade 2 Low Carbon Steel material, Zinc plated finish.

The L.H. Dottie RC2 Rod Coupling is a straight rod coupling used
to couple threaded rod for extended lengths. Size: 3/8-inch diameter
by 1-1/8-inch length. Made of steel. Zinc plated finish.

Anchor kit, Number 122 Anchor size, Number 10 by 1-Inch length
Screw size, 1/4-Inch Drill size, Phillips/Slotted Drive, Color Yellow,
Includes (100) Sheet Metal Screw, (100) Anchor, (1) Carbide
Masonry Drill, 1 standard package.

The L.H. Dottie FW10 Flat Washer is round with a 7/32-inch inner
diameter, an 1/2-inch outer diameter and a 3/64-inch thickness.
Fits a #10 bolt fastener size. Made of steel, Zinc plated finish.
sold as 100 pack.

Self Drilling Screw, Hex Washer head, Number 10 by 1-Inch length size,
5/16-Inch Hex, Steel material, Zinc plated finish, standard package of 100 units.

Wedge Anchor, Fully threaded, 3/8-Inch-16 TPI Hole diameter by 2-1/4-Inch
length. Anchor size, 1-1/4-Inch thread length, Zinc plated finish.

Wedge Anchor, Fully threaded, 3/8-Inch-16 TPI Hole diameter by 3-Inch
length Anchor size, 1-7/8-Inch thread length, Zinc plated finish.

EMT200, 2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields,
impact damage and crushing when pulling electrical cable.
This steel conduit resists flattening, kinking and splitting and is
coated with zinc for corrosion and abrasion resistance.
SOLD PER 10ft. stick.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

22.5 Degree Rigid steel conduit elbow is manufactured from prime conduit shell with high-strength in accordance with the latest specifications and standard of ANSI C80.1(UL6). The interior and exterior surface of elbows are free from defect with a smooth welded seam, and are thoroughly and evenly coated with zinc using hot dip galvanizing process.

45 Degree EMT elbow is manufactured from prime EMT conduit in accordance with the latest specifications and standards of ANSI C80.3 (UL797). The interior and exterior surface of elbows are free from defect with a smooth welded seam, and also are thoroughly and evenly coated with zinc using hot dip galvanizing process

90 Degree EMT elbow is manufactured from prime EMT conduit in accordance with the latest specifications and standards of ANSI C80.3 (UL797). The interior and exterior surface of elbows are free from defect with a smooth welded seam, and also are thoroughly and evenly coated with zinc using hot dip galvanizing process.

Wire Trough, Type 3R, Bulletin F40PT (Galvanized Painted Type 3R Wiring Trough),
Size/Dims: 6" x 6" x 24", Material/Finish: Galv/paint.

PS-1100-AS-2-EG, 2" Pre-assembled electrogalvanized steel clamp, for 2" conduit. Fits rigid and sch40/80 pipe
Pipe clamp, strut clamp, unistrut pipe clamp, power strut clamp. Power-Strut PS-1100-AS-2-EG Steel Clamp 2"

PS-1100-AS-3-EG, 3" Pre-assembled electrogalvanized steel clamp, for use with Rigid, SCH40/80 conduit.
Pipe clamp, strut clamp, unistrut pipe clamp, power strut clamp. Power-Strut PS-1100-AS-3-EG Steel Clamp 3"

PS-1100-AS-4-EG, 4" Pre-assembled electrogalvanized steel clamp, for use with 4" conduit.Fits rigid and sch40/80 pipe.

Pipe clamp, strut clamp, unistrut pipe clamp, power strut clamp. Power-Strut PS-1100-AS-4-EG Steel Clamp 4"

PS-1100-AS-6-EG, 6" Pre-assembled electrogalvanized steel clamp, for use with 6" conduit.Fits rigid and sch40/80 pipe.

Pipe clamp, strut clamp, unistrut pipe clamp, power strut clamp. Power-Strut PS-1100-AS-6-EG Steel Clamp 6".

Power-Strut Continuous thread rod in electro-galvanized finish is made of steel that offers strength and durability.
It measures 3/8 Inch diameter x 10 ft.
Sold Per Foot.

All Thread Rod 5/8 inches X 10 feet,hot dipped galvanized.

Power-Strut Continuous thread rod in electro-plated finish is made of steel that offers strength and durability.
It measures 5/8 Inch diameter x 10 ft.
sold per 10' stick

Steel Spring Nut with long spring, 3/8" thread diameter, with electro-galvanized finish.
For use with PS 200,210, and 300.

RACO 2902 1/2"
Compression connectors are suitable for applications above 600V.
All steel construction insures mechanical protection for the raceway.
All components are zinc electro plated for corrosion protection.

RACO 2905, non insulated, zinc electro plated steel, size: 1-1/4 inches.
Used for EMT Conduits.
Compression connectors are suitable for applications above 600V.
All steel construction insures mechanical protection for the raceway.
All components are zinc electro plated for corrosion protection.