Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-4-72-A
Material Specifications Pole Gain
• 6061-T6 Aluminum Pole Gain
with 8”, 10”, & 12” mounting
centers
• Accepts 5/8” mounting hardware
• Can be banded using the
Aluma-Form Bolt-A-Band
banding system
Fiberglass Tube
• 3-5/8” X 4-5/8” Super-Smooth,
proprietary veiled gray polyester
tube with added ultraviolet
protection
Two buckles required for all band brackets and attachments.
Fiberglass Crossarm Dead End With Eyebolts Aluma-Form FDA-20-2-96-EB-FG 96"
Fiberglass Crossarm, Dead End Material Specifications Pole Gain 65-45-12 Ductile Iron, hot-dipped galvanized per ASTM A153 (12” mounting centers) 2 guy attachment positions rated at 30,000# per hole,Accepts 3/4” pole mounting hardware, Can be banded using the Aluma-Form Bolt-A-Band banding system,Fiberglass Tube 3-5/8” X 4-5/8” Super-Smooth, proprietary veiled gray polyester tube with added ultraviolet protection.
Two buckles required for all band brackets and attachments.
Fiberglass Crossarm Dead End With Eyebolts Aluma-Form FDA-20-2-72-EB-FG 72"
Fiberglass Crossarm Dead End, Material Specifications Pole Gain 65-45-12 Ductile Iron, hot-dipped galvanized per ASTM A153 (12” mounting centers) 2 guy attachment positions rated at 30,000# per hole,Accepts 3/4” pole mounting hardware, Can be banded using the Aluma-Form Bolt-A-Band banding system,Fiberglass Tube 3-5/8” X 4-5/8” Super-Smooth, proprietary veiled gray polyester tube with added ultraviolet protection.
Two buckles required for all band brackets and attachment.
Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-4-96-A Composite Crossarm
Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-4-96-A Composite Crossarm
Material Specifications Pole Gain
• 6061-T6 Aluminum Pole Gain
with 8”, 10”, & 12” mounting
centers
• Accepts 5/8” mounting hardware
• Can be banded using the
Aluma-Form Bolt-A-Band
banding system
Fiberglass Tube
• 3-5/8” X 4-5/8” Super-Smooth,
proprietary veiled gray polyester
tube with added ultraviolet
protection
Two buckles required for all banded brackets and attachments.
Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-2-48-A 48" Composite Crossarm
Material Specifications Pole Gain , 6061-T6 Aluminum Pole Gain with 8”, 10”, & 12” mounting centers, Accepts 5/8” mounting hardware, Can be banded using the Aluma-Form Bolt-A-Band banding system Fiberglass Composite Tube, 3-5/8” X 4-5/8” Super-Smooth, proprietary veiled gray polyester tube with added ultraviolet protection.
Two buckles required for all band brackets and attachments.
Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-4-120-A 10ft Composite Crossarm
Fiberglass Crossarm Tangent Arm Aluma-Form FTA20-4-120-A Composite Cross-arm
120" (10ft) x-arm Xarm
Material Specifications Pole Gain
• 6061-T6 Aluminum Pole Gain
with 8”, 10”, & 12” mounting
centers
• Accepts 5/8” mounting hardware
• Can be banded using the
Aluma-Form Bolt-A-Band
banding system
Fiberglass Tube
• 3-5/8” X 4-5/8” Super-Smooth,
proprietary veiled gray polyester
tube with added ultraviolet
protection
Two buckles required for all banded brackets and attachments.
Fiberglass Crossarm Dead End With Eyebolts Aluma-Form FDA-20-2-120-EB-FG 120"
Fiberglass Crossarm Dead End, Material Specifications Pole Gain 65-45-12 Ductile Iron, hot-dipped galvanized per ASTM A153 (12” mounting centers) 2 guy attachment positions rated at 30,000# per hole,Accepts 3/4” pole mounting hardware, Can be banded using the Aluma-Form Bolt-A-Band banding system,Fiberglass Tube 3-5/8” X 4-5/8” Super-Smooth, proprietary veiled gray polyester tube with added ultraviolet protection.
Two buckles required for all band brackets and attachment.
6' Crossarm, Blank Wood Arm 3-1/2" X 4-1/2" Not Bored BROOK 6FT BLANK-34
Blank Wood Arm 3-1/2" X 4-1/2" X 72" fastened at right angles to an upright (as the horizontal member of a cross or a traverse on a telephone pole.
-Due to the 6 ft length, this must ship LTL freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
Brace,Crossarm 11/16 Hole On Each End H-J7130116
Flat Crossarm Brace
30" long. Have rounded ends and are punched at one end with a 11/16" hole, with a 11/16" hole at the other end. Holes punched 1-inch from
brace end to center of hole. Hot dip galvanized. (096359239482).
10' Crossarm, Blank Wood Arm 4-3/4" X 5-3/4" Not Bored TD90-10
Blank Wood Arm 4-3/4" X 5-3/4" X 10' fastened at right angles to an upright (as the horizontal member of a cross or a traverse on a telephone pole.
-Due to the 10 ft length, this must ship LTL freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
12' Crossarm, Wood Arm Alley 3-3/4" X 4-3/4" Pre-Drilled TD90-12
Pre-Drilled Crossarm Wood Arm Alley 3-3/4" X 4-3/4" X 12' fastened at right angles to an upright (as the horizontal member of a cross or a traverse on a telephone pole.
-Due to the 12 ft length, this must ship LTL freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.
Bird Perch Deterrent Crossarm PLP BPD-XARM
The BIRD PERCH DETERRENT is designed to provide protection from incidental avian contact with overhead distribution lines. It provides an economical means of reducing bird fatalities and line outages while being easily installed over distribution crossarms.
Crossarm/Angle Dimensions (W x H) 3.25" x 4.25" (8.3 x 10.8 cm)
up to 3.75" x 4.75" (9.5 x 12 cm)
List Price: $14.74
Our Price: $12.90
You save $1.84!
Universal Stringing Block Power Roller - Reliable SB7
This lightweight, strong, and versatile 7” stringing block will be a valuable addition to any line stringing inventory and provide dependable service under the extreme conditions common to the Line Construction Industry.
***Stringing blocks do not come with a clevis or hook SOLD SEPARATELY***
