6-1/2" Wedge Clamp Conductor .250"-.414" MSI 7187
MSI H-7187, 6-1/2" Wedge Clamp, is mechanical holding device used for strain relief in service applications. It has solid stainless bails that are used on eye hooks and insulators with a diameter larger than 1.5". This clamp is designed for low tension applications only, and also has a mechanical working load of 1,200 lbs.
Specifications/Applications:
- Bail Size: 6-1/2"
- Material: Solid Stainless Steel
- Conductor Diameter Range: 0.250" - 0.414"
- ACSR ASTM-B232: 1/0 - #4
- AAAC ASTM-B399: 1/0 - #4
- AAC ASTM-B231: 2/0 - #2
Bracket Mast Clamp Pipe Range 2-4" H-SMB-40
Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized
Bracket Mast Clamp Pipe Range 2-4" H-SMB-40
Bracket Mast Clamp 1¼" - 3" Pipe Range H-J0590
Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized
Crouse-Hinds EHC3 Die Cast Aluminum Clamp-On 4-Hole CRHEHC3
CROUSE HINDS 1 INCH SERVICE ENTRANCE HEAD CLAMP. CRHEHC6 1" WEATHERHEAD
Crouse-Hinds 4-Hole Entrance cap of trade size 1-inches, is perfect for EMT, rigid and IMC conduits. It features die-cast aluminum construction and clamp-on connection. Cap is UL listed and cUL certified. Gooseneck Goose Neck Service Entrance Masthead Mast Head
Crouse-Hinds EHC5 Die Cast Aluminum Clamp-On 4-Hole CRHEHC5
CROUSE HINDS 1.5 INCH SERVICE ENTRANCE HEAD CLAMP. CRHEHC6 1.5" WEATHERHEAD
Crouse-Hinds 4-Hole Entrance cap of trade size 1.5-inches, is perfect for EMT, rigid and IMC conduits. It features die-cast aluminum construction and clamp-on connection. Cap is UL listed and cUL certified. Gooseneck Goose Neck Service Entrance Masthead Mast Head
Crouse-Hinds EHC6 Die Cast Aluminum Clamp-On 4-Hole CRHEHC6
CROUSE HINDS 2 INCH SERVICE ENTRANCE HEAD CLAMP. CRHEHC6 2" WEATHERHEAD
Crouse-Hinds 4-Hole Entrance cap of trade size 2-inches, is perfect for EMT, rigid and IMC conduits. It features die-cast aluminum construction and clamp-on connection. Cap is UL listed and cUL certified. Gooseneck Goose Neck Service Entrance Masthead Mast Head
Steel Reducing Bushing 2"X 1" WAL CRS-RE63
Crouse-Hinds RE63 Feraloy® Iron Alloy Explosionproof Dust-Ignitionproof Reducing Bushing 2-Inch x 1-Inch
Crouse-Hinds Reducing bushing features feraloy iron alloy construction with electro-galvanized and aluminum acrylic paint finish. It has trade size of 2-Inch x 1-Inch. This integral bushing prevents damage to wire. It has full, clean cut tapered threads for easy connection. This explosion-proof, dust-ignition-proof bushing is suitable for use in threaded heavy wall conduit systems. Bushing is UL listed, CSA certified and meets NEC/CEC standards. Read less
