K14C Red Collar Phillips/Slotted Drive Screw Anchor LH
L.H. Dottie Anchor kit includes 50 Phillips/slotted screws made of sheet metal and 50 red color anchor of size 23. Screw measures 1-1/2 Inch and inludes 1/4-Inch drill.
List Price: $18.12
Our Price: $16.99
You save $1.13!
L.H. Dottie 2AK Anchor Kit
Anchor kit, Number 122 Anchor size, Number 10 by 1-Inch length
Screw size, 1/4-Inch Drill size, Phillips/Slotted Drive, Color Yellow,
Includes (100) Sheet Metal Screw, (100) Anchor, (1) Carbide
Masonry Drill, 1 standard package.
L.H. Dottie FW-10 Flat Washer 1
The L.H. Dottie FW10 Flat Washer is round with a 7/32-inch inner
diameter, an 1/2-inch outer diameter and a 3/64-inch thickness.
Fits a #10 bolt fastener size. Made of steel, Zinc plated finish.
sold as 100 pack.
L.H. Dottie W38214 Wedge Anchor
Wedge Anchor, Fully threaded, 3/8-Inch-16 TPI Hole diameter by 2-1/4-Inch
length. Anchor size, 1-1/4-Inch thread length, Zinc plated finish.
L.H. Dottie W38300 Wedge Anchor 3"
Wedge Anchor, Fully threaded, 3/8-Inch-16 TPI Hole diameter by 3-Inch
length Anchor size, 1-7/8-Inch thread length, Zinc plated finish.
TOGGLE / MOLLY BOLT 1/4"X3" 04233 POWERS/S
SOLD EA.
- The Toggle / MOLLY Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other base materials.
- The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle.
WEDGE ANCHOR DOTTIE W38300 3/8"X3"/S
WEDGE ANCHOR DOTTIE W38300 3/8"X3"Wedge anchors can be installed through the fixture.
Assemble nut and washer until the nut is flush with the top
of the anchor, insert into predrilled hole. Hammer anchor
into hole until the washer is flush with surface of the fixture.
SOLD EA.
WEDGE ANCHOR TRUBOLT 1/2"X5-1/2"/S
Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length.