Knockout Punch Set with Wrench Klein 53732SEN

Automatically limits desired torque. Torque by feel. Pull and clickit's torqued to micrometer accuracy...

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Set of the ratcheting box wrenches in heavy plastic roll-up pouch. Both ends are...

MILWAUKEE® Lineman's 5-in-1 Ratcheting Wrench features the most durable ratchet. The ratcheting wrench has built-in strike face offered in both milled and smooth, providing you with a dedicated surface for hammering. These wrenches have large directional switches that you can easily press while wearing gloves. The durable forged steel construction provides you with longer tool life. The wrench fits 3/4", 1", and 1-1/8" square sockets and 9/16" and 3/4" standard sockets.

Lineman's High-Leverage Ratcheting Wrench features the most durable ratchet. The ratcheting wrench has a built-in strike face available in both milled and smooth, providing you with a dedicated surface for hammering. These wrenches are constructed from durable forged steel for longer tool life. The high leverage wrench fits 3/4", 1", and 1-1/8" square hardware.

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Dual End Lineman Wrench 12" Lowell 103TDE
Triple Dual End Ratcheting Lineman Wrench.
Lineman's Wrenches for high line utility pole installation and repair.

Bolt-through design allows bolts to pass through the socket. 3/4'' and 1'' x 1-1/8'' combination square....

• Ratcheting wrench features six sizes in one tool (6-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square sizes
• 9/16-Inch and 3/4-Inch hex sizes
• Works on most common utility pole hardware, such as lag bolts, ''C'' clamps and suspension bolts
• Ratcheting Wrench's bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Bright yellow socket for easy visibility

Standard 10" Handle. The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on....

The Bolt-Thru design allows threaded rod to pass thru the socket so that nuts can be secured on any threaded length. 3/4" x 1" x 1-1/8" squares....

Versatile wrench fits all nuts and bolts to 1-1/2'' (38 mm). Eliminates the need for carrying several fixed-size wrenches.

For 5/8" hardware Large end has 29/32" and 1-3/32" openings. Small end has 5/8" and 7/8" opening. Forged from....

For 3/4" hardware Large end has 1-1/16" and 1-5/16" openings. Small end has 5/8" and 3/16" openings. Forged from....

Similar to standard lineman's wrench, but with the openings sized to NEMA hardware specifications....

US Heavy 1'' Erection Wrench with Hole KLEIN-3214TT.
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.

Wrench Socket Set 20 Piece 3/8-Inch Drive Socket Wrench Set Klein 65508

Lineman's 4in1 Ratcheting Insulated Box Wrench is 1000V UL Classified. High contrast size markings let you identify size easier. The box wrench features twelve point sockets that fit 1/2", 9/16", 5/8" and 3/4" hardware.

US Heavy 7/8'' Erection Wrench with Hole US Heavy 7/8'' Erection Wrench with Hole KLEIN-3213TT.
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding

Heavy-duty, double-duty hammer drives lags and pulls big nails. Special high-carbon steel....

A screw type grip used to temporarily fasten lashing wire under tension before placing a permanent clamp like or D or E lashing wire clamp. Grip works with any size lashing wire.

One milled face for driving staples used in pole-line work and common, unhardened nails. Other face is smooth for driving heavier duty hardware. Rugged and well-balanced, with the weight to drive lag bolts. Forged, tempered-steel head is only 3-3/4'' (95 mm) long for use in tight areas.

Extra capacity allows use of a smaller size wrench to handle....

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Versatile wrench fits nuts and bolts up to 1-5/16'' (33 mm). Convenient and handy size (11 total length) with a continuous-taper handle (8) for alignment of bolt and rivet holes.

US Heavy 3/4'' Erection Wrench with Hole KLEIN-3212TT
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.

Designed for pole-line work. Rugged and well-balanced, with the weight to drive lag bolts. Forged, tempered-steel head is only 3-3/4'' (95 mm) long for use in tight areas. Identical faces with 1-3/4'' (44 mm) round-crown driving surface and beveled edges.

Designed to reach shielded F connector fittings with a preset torque of 30 in-lb, this right angle swivel torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.

The Klein Tools Lineman's Insulating 4-in-1 Box Wrench is the only double ended 4-in-1 wrench on the market to meet the ASTM standard 1000V rating. It features a transparent handle that shows the metal ends of the wrench are not touching. The solid, durable wrench features four 12 point socket sizes: 1/2'', 9/16'', 5/8'', and 3/4''.

STAR KEY KIT JONARD SSK-876

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Extra capacity allows use of a smaller size wrench to handle....

Designed with two open-ended wrench heads and an oval hole for turning pole steps, this Bell System Type wrench is perfect for telecom and datacom work applications.
This lineman’s wrench features the following:

• Large end of the wrench accommodates 5/8” and 3/4” bolts to NEMA standards
• Small end of the wrench accommodates 3/8” bolts, 1/2” bolts, and 1/2” drive screw heads to NEMA standards
• Faces of the wrench openings are offset to provide handle clearance

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.

Torque Wrench, Speed Head, 7/16", 20 in/lb JONARD TWAS-71620

Torque Wrench Speed Head is designed to act like a ratcheting wrench. The tool skips over the corners of the bolt or nut being turned so no repositioning of the tool is required (allowing continuous turning).

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 30 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Torque Wrench, Full Head 7/16", 20 in/lb JONARD TWAF-71620

Torque Wrench Full Head is a full size open end wrench that behaves like a traditional open end wrench. Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved.

JONARD M-216CKIT - CAN WRENCH SECURITY KEY KIT

Can Wrench with Wire Stripper & Security Key Insert Kit. Six tools in one. Multiple opening, tightening, stripping and security key functions.
CAN WRENCH - M-216CS22, open telephone box fasteners and tighten nuts on binding posts. Designed for universal access to telephone boxes and pedestals.

Designed to be used on 9/16” hex shielded F connectors (RG11), this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.
This security shield tool features the following:

• Can be used with a torque wrench for precise torque adjustments
• Machined and heat treated steel with nickel-plated finish for maximum durability
• Knurled handle for secure gripping
• Steel loop included for better leverage and easy storage

Two tools in one; saves space in your pouch. One end opens telephone box fasteners, the other....

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

JONARD M-216CS22 - CAN WRENCH, ERGONOMIC W/ WIRE STRIPPER

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket (1 1/2" deep) with 22 AWG Stripper Blade. Open telephone box fasteners and tighten nuts on binding posts. Designed for universal access to telephone boxes and pedestals.

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Designed for use on 7/16” F connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Designed for use on 1/2” connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Both ends are offset 25° for more convenient use in confined spaces and on long studs. Different size...

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

JONARD M-216C/EX - CAN WRENCH, ERGONOMIC HEX

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket. Double end can socket wrench, 3/8" and 7/16" hex, orange Impact resistant thermoplastic ergonomic handle. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts.

Designed for use on 7/16” F connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

Designed for use on 1/2” connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

The Powerline Hammer Holder from Klein Tools is made of Cordura Nylon, which is exceptionally resistant to abrasion, punctures, and riveted for added durability. The holder itself is also riveted and double- stitched providing more strength.
Belt Width: up to 2.25" (57.2mm)
Overall Length: 4.125"(104.8")
Overall Width: 2.25"(57.2mm)
Overall Height: 3.75" (95.3mm)

Designed to be used on 7/16” hex shielded F connectors, this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.
This security shield tool features the following:

• Can be used with a torque wrench for precise torque adjustments
• Perfect for use on SS-1D and EZ-NLS security shields and NSS Notch-Trap sleeves
• Machined and heat treated steel with black oxide finish for maximum durability
• Knurled handle for secure gripping
• Steel loop included for better leverage and easy storage

Designed for use on 7/16” F connectors, nuts, and bolts, this combination wrench makes tightening and loosening quick and easy. This combination wrench features the following:

• Ratcheting box-end has a 15° angled head to keep hands away from work
• Ratcheting box-end also offers 12 points of contact to provide maximum torque
• Wrench-end has a 15° offset to allow easy access to connectors, nuts, and bolts
• Made of chrome plated chrome vanadium steel for maximum strength and durability

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• 6” overall length for easy portability and storage

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• Extra long 6” shaft and 9” overall length for greater reach