The Fluke Networks TS30 telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; monitors lines without disrupting service; and retains one 23-digit redial number for about eight minutes. It provides tone or pulse operation. A pair of LEDs on the front of the unit indicates line polarity when off hook. The test set passes a 20-foot (6 m) drop test and is Ingress Protection certified IP54 for protection against dust and splashed water. The keypad has 12 standard dialing keys including star and pound, and function keys to mute, check polarity, redial a number, and pause for accessing a second dial tone when dialing through a PBX (private branch exchange). A two-position switch allows selection of monitor mode for high-impedance monitoring without disrupting service, and talk mode for dialing and talking. The test set is made of high-impact polycarbonate that provides excellent insulating properties. Its contoured hand grip rests on the shoulder to enable hands-free operation. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additionally includes various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines.

The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

Fluke Network TS19 19800009 Telephone Test Set
This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
Specifications:

• Loop Limit: 2.4 KO Maximum at 48 VDC (nominal 15 mA minimum loop current)
• DC Resistance ( Talk Mode) : 150 O typical at 80 MA current
• AC Impedance ( Monitor Mode) : Low Impedance (ring position) 600 at 1 KHz
• Rotary Dial Output: 10 pps. 5 pps
• Pulsing Rate: 60% + 2%
• Percent Break: 800 ms typical
• Interdigit Internal Leakage during break: 50 KO
• DTMF Output: +1% maximum
• Tone Frequency Error Level per tone pair: dbm maximum - dbm maximum
• High versus low tone difference: 4 db maximum
• Length: 8.75" (22.2cm)
• Width: 2.375" (6.03cm)
• Height: 3.375" (8.57cm)

The OTDR 800 is the newest handheld OTDR from Ripley’s ODM® brand that provides test technicians and contractors with an all-in-one solution for testing optical reflection and loss in fiber networks.

The Marker-Mate Electronic Marker Locator (EML-100) is designed to locate buried electronic markers, including Tempo OmniMarker™ and UniMarker™ models at industry standard frequencies. With the updated capability of detecting nine different electronic marker types simultaneously, when in “scan” mode (power, European power, water, sanitary, telephone, fiber optic, gas, cable TV, non-potable water).

Select Spike Marker Model

SELECT OmniMarker II MODEL

Tele-Mate® Telephone Test Set is
designed to help technicians install, service and maintain voice service with ease.
Able to tackle the complexities of today’s analogue telecom lines, the
TM-500 offers the convenience of line powered (no battery needed) operation
and useful features like high impedance monitor that is data and DSL safe,
polarity test, speed dial, last number dialled and pulse dialling making a technician
more productive.

TM-700 DSL compatible in both Monitor and Talk modes, the TM-700’s LCD screen makes reading polarity, voltage, current, and ringing frequencies easier than ever, and clearly shows speed dials and recent numbers for faster access.
TM-700 features over-voltage and over-current detection for safer operation and also features an intercom mode, a built-in toner for pair tracing, and DTMF detection and measurement

Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.

Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.

Voltage Tester The Fluke Networks® C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

Voltage Tester The Fluke Networks® C9973 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

The PD Series® All-Purpose Utility Meters are phasing voltmeters designed to replace numerous other meters (Please view pictures)that feature a single range and/or perform a single function.
INCLUDES

• 0 – 25kV All-purpose utility meter,
  8 ft. regular cable,
  8 ft. extension cable,
  hook probe,
  straight probe,
  3kV power supply,
  manual,
  case

• Large (3/4") LCD Digital Meter with Backlight
• Multiple Ranges 2kV, 20kV, 25/50kV
• Completely Shielded Housing for Meter and Second Probes
• Completely Shielded Interconnect Cable(Insulated 35kV to Ground), that Does NOT Have to be Held Off of Grounded or Live Objects for Fear of Shock or Interfering with the Reading
• Interconnect Cable Lengths up to 100ft.
• Patented Input Circuitry
• The Most Accurate High Voltage Meter Available, with Accuracy to +/- 1%
• Both Probes are Impact and Water Resistant Designed to Withstand Wear
• Both Probes are Stored in Either a Highly Durable Padded Carrying Case or a Canvas Bag

The PD800W Cordless Phasing Tester accurately and easily operates in multiple applications including phasing, voltage detection, phase sequencing and phase angle indication.
INCLUDES

• 120 volt – 800,000 volt cordless phasing tester
• Hook probe
• Straight probe
• Universal/grip-all adapter
• Manual

5-Position Selector Switch

• OFF - Power off for storage
• DEG - For phase angle measurements from 208V to 800kV
• URD - For phasing and voltage detection on Underground Rural Distribution systems from 1Kv - 51Kv.
• OH - For phasing and voltage detection on overhead systems from 1kV - 51kV
• TEST - Tests internal meter circuitry and displays battery voltage

Bierer's Hi-Pot meter is designed to perform a preliminary milliamp leakage test on URD cable.
INCLUDES

• 0-7.2kV hi-pot meter,
  
• hook probe,
• 2 bushing adapters,
• 2 grip-alls,
• manual,
• small canvas bag

The VD1000 Digital Voltage Detector is designed for easily indicating AC voltage on Underground primary, Overhead primary, and Transmission conductors up to 999 kV. The large digital display can be seen and read at distances up to 50’. The unit is perfect for large system voltages from 4kV to 765kV Phase to Phase.
INCLUDES

• 1kV – 999kV digital voltage detector
  Hook probe
  Straight probe
  Universal/grip-all adapter
  Manual
  Case

The AV-40 is a non-contact voltage indicator with an audible and visual alarm to indicate the presence of voltage, with an operating range from capacitive test point /secondary voltage to 40kV (line to ground). Activation threshold meets ASTM requirements. Can be used as a stand-alone Voltage Detector without second probe
INCLUDES

The ST800 puts a high magnitude pulse between the neutral/hot leg or hot leg/hot leg for any secondary service (120v, 208, 277, 48v). It cannot be fooled by telephone and cable television banding often missed by continuous loading devices.
INCLUDES

• 800 Amp Service Tester
• Test Leads
• Small Bag

• Includes adapter for 1.25 mm LC connectors
• 650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
• Universal connector accommodates 2.5 mm ferruled connectors, such as FC, SC, and ST connectors
• Has three different modes: Continuous wave, pulsing, and slower pulsing mode
• Works in OTDR dead zones and is used for end-to-end visual fiber identification
• Light and portable pen-style design is perfect for on the go use
• 60 hours of battery life powered by two AAA batteries (included)

The Ferret Plus, designed and engineered by Ferret Tools, features the world’s first-ever non-contact voltage detector to help identify live cables from a greater reach than ever before. Based on the award-winning electronic design of the original Ferret, the Ferret Plus is perfect for someone who loves having the latest technology with all the bells & whistles.
The new premium Ferret Plus is:

• The perfect solution for any electrician
• Engineered with new technology to bring you an App controlled variable focus lens, super-fast charge, Ferret always up viewing mode, and a right angle adaptor
• Comes with built-in (on board) memory providing the ability to record video even when out of WiFi range including inside metal ducts, underground or underwater
• It also comes with a built-in non-contact voltage detector to help detect live cables from a greater reach than ever before (for 150 Voltage or higher)
• Perfect for pulling in cabling inside enclosed spaces
• The most reliable and durable tools with the latest smart technology to help work faster, easier, and safer

• 650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
• Universal connector accommodates 2.5mm ferruled connectors, such as FC, SC, and ST connectors
• Has three different modes: Continuous wave, pulsing, and slower pulsing mode
• Works in OTDR dead zones and is used for end-to-end visual fiber identification
• Light and portable pen-style design is perfect for on the go use
• 60 hours of battery life powered by two AAA batteries (included)

• Black markings on yellow, with red stud center markings every 16 inches
• Measurements are marked on both sides and both edges, graduated to 1/16-Inch
• Engraved graduations on both sides
• Constructed of tough nylon, reinforced with glass fibers for added durability, and resistance to weather, abrasion, and most chemicals
• Positive locking joints and stainless steel spring hinges for added strength

• High strength spring steel fish tapes are stiff for long runs and are great for heavy duty wire pulls; Updated model Cat. No. 56333 available
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out
• Polypropylene case and handle are extremely durable, and offer maximum in shock and impact resistance
• Raised finger grips transfer 100-percent of the winding power from your hand and fingers
• Full grip style handle gives you a firm, steady grip as you pull tape from the case
• Unique sloped handle optimizes hand position for quick hand-over-hand rewinds
• The 13-Inch (330 mm) case diameter means you can reel in 15-percent more tape in a single revolution than similar sized 12-Inch (305 mm) tapes, saving you time and effort
• Patents: D574,277; 8,212,178; 8,168,921; 8,164,025. Other patents pending

• Strong, 6-foot (1.83 m) long hardwood rules with clear abrasion-resistant coating
• Black markings on yellow, with red stud center markings every 16-Inches
• Measurements are marked on both sides and both edges, graduated to 1/16-Inch
• Riveted lock joints are designed for long wear and maintained accuracy
• Engraved graduations on both sides

• Black markings on yellow, with red stud center markings every 16-Inches
• Measurements are marked on both sides and both edges, graduated to 1/16-Inch
• Engraved graduations on both sides
• Constructed of tough nylon, reinforced with glass fibers for added durability, and resistance to weather, abrasion, and most chemicals
• Positive locking joints and stainless steel spring hinges for added strength

Tape Measure 30' Magnetic Klein 93430

• Rare earth magnetic end hooks
• First 11'' (279 mm) has oversize, bold numbers.
• Easy-read fractional scale.
• Double-sided rule for measurement while using against wall, ceiling or conduit.
• Horizontal and vertical standout for easy one person measurements.
• Shock and impact resistant case.
• Steel belt clip for convenience.
• Nylon-coated hardened steel blade resists abrasion and wear for long life.
• Built-in shock absorber to protect blade tip.
• True zero feature for accurate inside and outside measuring.
• Durable steel belt clip for convenience.
• Multi-riveted end hook with bottom blade protector reinforces the blade tip and provides maximum pull-out strength.

• Multiple grooves molded into the fish tape provides less friction in conduit with or without wires for smoother tape feeding; updated model Cat. No. 56382 available
• Non-conductive fish tape and eyelet tip offer added protection against shock from energized sources
• The 13-Inch case diameter means you can reel in 15-percent more tape in a single revolution vs. a standard 12-Inch case
• Raised fingergrips help transfer 100-percent of the winding power from your hand and fingers
• The unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level payout of tape on the backswing while feeding conduit
• Made in the USA

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

• Woven fiberglass tape with moisture-proof coating of polyvinyl chloride assures durability and protects against oil or chemicals
• Can be immersed in water without adverse effects
• All metal parts are nickel plated for protection against rust
• End hooks are permanently attached to a reinforced strip
• Black case and reel are ruggedly built, yet lightweight and comfortable to use
• Tape line graduated in feet and inches to 8ths
• Protective carrying case encloses tape completely
• Tape ring tucks neatly into case opening for storage

• Permanent, laser etched 1-foot increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out; Updated model Cat. No. 56350 available
• Non-conductive, fiberglass fish tape slides easily over existing wires and through multiple bends
• The lightweight, strong fiberglass tape resists harsh elements and is strength rated up to 500 pulling pounds
• The 13-Inch case diameter means you can reel in 15-percent more tape in a single revolution vs. a standard 12-Inch case
• Durable 7-Inch leader helps push through crowded conduit
• Raised fingergrips help transfer 100-percent of the winding power from your hand and fingers
• The unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level payout of tape on the backswing while feeding conduit
• Made in the USA
• Repair kit available (Cat. No. 56115)
• Replacement eyelets (Cat. No. 56116) and spiral leaders (Cat. No. 56120) available

ONLY 3 IN STOCK

Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Tempered, high quality tape keeps its stability as it glides between surfaces for effective pushing and pulling of wire under carpets, through insulated walls and over suspended ceilings. 25' length is perfect for short wire runs associated with light commercial, residential and voice-data-video-audio installations.

• Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out
• Polypropylene case and handle offer the maximum in impact resistance
• Raised fingergrips transfer 100-percent of the winding power from your hand and fingers
• Full grip style handle gives you a firm, steady grip as you pull tape from the case
• Unique sloped handle optimizes hand position for quick hand-over-hand rewinds

The Klein Tools 50' (15.24m) steel fish tape is perfect for short wire runs associated with light commercial, residential, and voice-data-video-audio installations. The tape features laser-etched descending marking allows you to accurately measure the depth of conduit runs and determined the amount of tape left to pay out.
Specifications:

30' Double Hook Magnetic Tape Measure Klein 9230

• Tape Measure features 13-Foot standout of wide, tough and durable blade
• Uncluttered, easy-to-read bold lines marked on blade every 1/8-Inch
• Heavy-duty, tough, durable nylon-coating protects blade printing and delivers longer blade life
• Retraction speed brake controls blade speed and protects fingers from touching blade
• Measurement scale printed on front and back sides of blade for versatility to address different types of measurements
• Double hook can secure tape to items such as studs, conduit, pipes, etc. on front or back side of blade to measure with either measurement scale
• Strong magnet on hook attaches to ferromagnetic objects such as steel studs, doors, panels, conduit, etc. for easy measuring
• The impact resistant housing is over-molded with a soft touch finish for excellent grip and stands up to jobsite demands
• Metal belt-clip securely holds tape measure to belts, pockets, or pouches
• Conduit Bending Table and 3-Phase Layout Guide printed on back-side of tape for convenience.

• Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls; Updated Model Cat. No. 56334 available
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out
• Polypropylene case and handle offer the maximum in impact resistance
• Raised fingergrips transfer 100-percent of the winding power from your hand and fingers
• Full grip style handle gives you a firm, steady grip as you pull tape from the case
• Unique sloped handle optimizes hand position for quick hand-over-hand rewinds
• The 13-Inch (330 mm) case diameter means you can reel in 15-percent more tape in a single revolution than similar sized 12-Inch (305 mm) tapes, saving you time and effort

• Durable, high strength 1/8-Inch wide stainless steel fish tapes are firm yet flexible for long runs and large wire pulls
• Corrosion resistant stainless steel tape extends the life of the tape
• Case design decreases payout effort and friction by optimizing the tape payout angle
• Slip-resistant housing geometry improves winding power and reduces binding
• Multi-position handle gives you a firm, steady grip as you pull or rewind the tape
• Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out
• Polypropylene case and handle offer high impact resistance

• Multi-groove fiberglass fish tape has a strong core for better pushing power while the grooves provide less surface area for smoother tape feeding
• Case design decreases payout effort and friction by optimizing the tape payout angle
• Slip-resistant housing geometry improves winding power and reduces binding
• Multi-position handle gives you a firm, steady grip as you pull or rewind the tape
• Updated non-conductive nylon tip is narrower for easier feeding and chamfered for less catch when pulling
• Durable fiberglass is longer lasting and maneuvers better in crowded conduit
• Polypropylene case and handle offer high impact resistance

Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits.
This voltage tester features the following:

• Non-contact low voltage detection from 24-1000 VAC identifies voltage in audio systems, cables with thick insulation, and other weak electromagnetic AC signals
• Non-contact high voltage detection from 90-1000 VAC identifies voltage in outlets, switches, circuit breakers, electrical panels, and more
• Can identify live voltage in wires and cables through insulation
• CAT IV 1000V rating for added operation and protection
• LED light and beep sound indicate that voltage is detected
• Built-In LED flashlight helps you see in dark places
• Compact and lightweight design with built-in pocket clip allows you to carry it on the go
• ETL listed and CE certified
• Automatically shuts off after 5 minutes to preserve battery life
• Powered by (2) AAA batteries (included)

Fiberglass Open Reel Long Tapes feature a GRIME GUARD™ Blade Wiper for Smoothest Retraction and to wick away jobsite contamination. Reinforced 3:1 Planetary Metal Gears won't strip, increasing the life of the tool.