Toggle mobile menu
FREE! 2021 CALENDAR
Box of 100ea.3M Scotchlok Insulation Displacement Connector (RED) 19-26AWGThe UR connector accepts two or three solid copper conductors for butt splicing. The connector is filled with a sealant to provide moisture resistance. RUS Listed.
Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.
Ream 1/2'', 3/4'' and 1'' conduit and install fittings in a fraction of the time. Reduce time on projects....
The Klein Tools 50' (15.24m) steel fish tape is perfect for short wire runs associated with light commercial, residential, and voice-data-video-audio installations.
Automatically limits desired torque. Torque by feel. Pull and clickit's torqued to micrometer accuracy...
Hinged metal box with one stand-up bit holder. General-purpose, high-speed bits for....
Lightweight, yet efficient shear-type cable cutters. Replaceable hook-jaw blades grab and hold cable while...
Standard length for most applications. Fits over long bolts and studs. Full hollow shafts facilitate...
Nut Driver 5/16" Cushion-Grip Klein 630 Exclusive hollow shaft design with Rare Earth magnetic tip...
The 6-in. Long-Nose, Side-Cutting Pliers are made of
the finest U.S. steel alloy. They are forged, precision machined,
hardened and carefully tempered for maximum strength and faultless
performance. The long nose pliers with side cutters have knives that
meet at the hinge first and then meet at least one-half of the knife
length. This precise knife-closing design increases knife life and
facilitates resharpening. Pliers are individually adjusted to meet
performance standards far exceeding application requirements.
Shear-cutting blades cut 350 MCM Copper and 350 MCM Aluminum cable. Does not cut steel or ACSR
Standard length for most applications. Fits over long bolts and studs. Full hollow shafts...
These Lineman's Side-Cutting pliers feature induction hardened cutting
knives for long life. The 2000 series blades are designed for heavy-duty
cutting of ACSR, screws, nails, and most hardened wire. The
high-leverage design provides 46% greater cutting power than other plier
designs. Exclusive handle tempering absorbs the ''snap'' when cutting
wire. Pick up these Klein's and feel the difference.
Ball-end works on angles up to 30 degrees. Top grade alloy still is tempered for added strength.....
These Long-Nose Side-Cutting Pliers are made of custom, US-made tool steel that features induction hardened, long-lasting cutting knives. The knurled jaws provide sure wrapping and looping.
Crimps and seats Scotchlok UG, UR, and UY connectors. Hot-riveted joint
for smooth action and no handle wobble. Curved handles for greater
control. Induction hardened side-cutting knives for long life.
Spring-loaded action for self-opening.
Designed to handle most cable installation applications cutting up to 3/4-Inch aluminum and copper coaxial cable. Cutting Capacity: 0.75'' (1.9 cm)
Klein 702-12 High-Tension hacksaw are designed for the professional, providing superior results with less effort. This Hacksaw features a curved front end and cushioned handles for easy cutting.Specifications:
The Klein 248-08 Diagonal-Cutters have a high-leverage design for 36% more cutting power than other pliers. Jaw Capacity: 0.75'' (1.9 cm)
MCM Cable Maximum Capacity: 900-Pair Soft Copper and AluminumSoft Cable Maximum Capacity: Up to 2-1/4'' (5.7 cm) Diameter
Quickly and easily pulls 1/8'' (3 mm) or 1/4'' (6 mm) flat steel fish
tape without damaging the tape. High-leverage design. Rivet is closer
to the cutting edge for 46% greater cutting and gripping power than
other plier designs. Induction hardened cutting knives for long life.
Hot-riveted joint ensures smooth action and no handle wobble.
Streamlined design with sure-gripping, cross-hatched knurled jaws.
Knockout Punch Set with Wrench Klein 53732SEN
The Coaxial Cable Cutter cuts up to 1-Inch (2.5 cm) aluminum and copper coaxial cable. This tough tool offers precision, one-hand shearing action without compression or frayed ends.
One milled face for driving staples used in pole-line work and common, unhardened nails. Other face is smooth for driving heavier duty hardware. Rugged and well-balanced, with the weight to drive lag bolts. Forged, tempered-steel head is only 3-3/4'' (95 mm) long for use in tight areas.
Cleanly strips 12 AWG solid wire. Heavier design for greater cutting
power. Extended handles provide added reach and leverage. Slim head
design for working in confined areas. Induction hardened cutting knives
for long life.
Klein Tools CL800 is an automatically ranging true root mean squared
(TRMS) digital clamp-meter that measures AC/DC voltage, resistance,
continuity, frequency, capacitance, and tests diodes via test-leads, and
temperature via a thermocouple probe. It also features a Low Impedance
(LoZ) mode for identifying and eliminating ghost or stray voltages.
Klein Tools’ Test and Measurement product line was exclusively designed
from the ground up by electricians for electricians. Years of field
research, combined with extensive input from electricians across
America, inspired the development of meters and electrical testers
loaded with innovative, time-saving features.
9" High-Leverage Lineman's Bolt-ThreadingHolding Hinge opening holds and cleans 5/8" pole line and hardware and bolts or threaded rods
Shear-type cutter for precision wire cutting. Two versatile jaw
positions. Serrated jaws provide sure-gripping power. Nickel-chrome
plated for long life.
Woven fiberglass tape with moisture-proof coating of polyvinyl chloride assures durability and protects against oil or chemicals. Tape ring tucks neatly into case opening for storage.
Heavy-duty, double-duty hammer drives lags and pulls big nails. Special high-carbon steel....
Designed for pole-line work. Rugged and well-balanced, with the weight to drive lag bolts. Forged, tempered-steel head is only 3-3/4'' (95 mm) long for use in tight areas. Identical faces with 1-3/4'' (44 mm) round-crown driving surface and beveled edges.
Includes: Heavy Duty Side Cutting Pliers (Cat. No. D2000-9NE). Klein-Kurve® Wire Stripper...
Simply dial desired wire size for fast, easy stripping. Adjustable tool makes short work of cutting and....
A heavy, strong, multi-purpose tool that saves time and effort on the job. The 3" (76 mm) width protects concrete when stripping forms. Efficient blade angle and 55-1/2" (141 cm) total length provide high leverage as a crow bar and nail and spike puller. Blade is forged and hardened alloy with keyhole nail-pulling slot in center and V-notch in tapered edge. Very efficient nail-pulling tool even in awkward positions. Can also be used to help align walls during tilt-up construction, to roll and align large pipe, to remove shingles and flooring, and for many other stripping and prying tasks.
General-purpose selection of the most frequently used nut drivers. Full hollow shaft (except 3/16'') designed with....
High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable, Jaw Capacity: 1.06" (2.7 cm)
MCM Cable Maximum Capacity: 1000 Copper, 1200 AluminumSoft Cable Maximum Capacity: 1-3/4'' (4.5 cm) Diameter
Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out.
Sized: 1/16" through 1/2" by 64ths. Hinged metal box with two stand-up bit holders. General-purpose....
Sized: 1/16" through 1/2" by 32nds. Hinged metal box with two stand-up bit holders....
Quickly installs and removes spring-tension hose clamps. Grips with
either end or side of jaws for work in confined areas. Nickel-chrome
plated for long life.
6" angled, hollow-ground cutting edge for cutting full 3-1/2" (89 mm) straight cuts and...
The Klein Tools 7-Piece Magnetic Nut Driver Set features nut drivers with internal flanges to provide a solid, twist-resistant shaft anchor. The nut drivers are made with chrome-plated, hollow shafts to help prevent corrosion.
Tested up to 20kV, this Class E, Type 1 hard hat meets ANSI Z89.1-2014, CSA Z94.1-15; EN397:2012+A1:2012-Lateral Deformation (LD) standard.