The Fluke Networks TS30 telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; monitors lines without disrupting service; and retains one 23-digit redial number for about eight minutes. It provides tone or pulse operation.

This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

The OTDR 800 is the newest handheld OTDR from Ripley’s ODM® brand that provides test technicians and contractors with an all-in-one solution for testing optical reflection and loss in fiber networks.

The Marker-Mate Electronic Marker Locator (EML-100) is designed to locate buried electronic markers, including Tempo OmniMarker™ and UniMarker™ models at industry standard frequencies. With the updated capability of detecting nine different electronic marker types simultaneously, when in “scan” mode (power, European power, water, sanitary, telephone, fiber optic, gas, cable TV, non-potable water).

Select Spike Marker Model

SELECT OmniMarker II MODEL

Tele-Mate® Telephone Test Set is
designed to help technicians install, service and maintain voice service with ease.
Able to tackle the complexities of today’s analogue telecom lines, the
TM-500 offers the convenience of line powered (no battery needed) operation
and useful features like high impedance monitor that is data and DSL safe,
polarity test, speed dial, last number dialled and pulse dialling making a technician
more productive.

TM-700 DSL compatible in both Monitor and Talk modes, the TM-700’s LCD screen makes reading polarity, voltage, current, and ringing frequencies easier than ever, and clearly shows speed dials and recent numbers for faster access.
TM-700 features over-voltage and over-current detection for safer operation and also features an intercom mode, a built-in toner for pair tracing, and DTMF detection and measurement

Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.

Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.

Voltage Tester The Fluke Networks® C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

Voltage Tester The Fluke Networks® C9973 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.

The PD Series® All-Purpose Utility Meters are phasing voltmeters designed to replace numerous other meters (Please view pictures)that feature a single range and/or perform a single function.
INCLUDES

• 0 – 25kV All-purpose utility meter,
  8 ft. regular cable,
  8 ft. extension cable,
  hook probe,
  straight probe,
  3kV power supply,
  manual,
  case

The PD800W Cordless Phasing Tester accurately and easily operates in multiple applications including phasing, voltage detection, phase sequencing and phase angle indication.
INCLUDES

• 120 volt – 800,000 volt cordless phasing tester
• Hook probe
• Straight probe
• Universal/grip-all adapter
• Manual

Bierer's Hi-Pot meter is designed to perform a preliminary milliamp leakage test on URD cable.
INCLUDES

• 0-7.2kV hi-pot meter,
  
• hook probe,
• 2 bushing adapters,
• 2 grip-alls,
• manual,
• small canvas bag

Commonly referred to as a Strand Dynaometer, the Strand Tensionmeter is used in tensioning new.

Designed to test the continuity of RJ45, RJ12, and RJ11 connectorized cables, this cable tester checks and troubleshoots pin connections in network and telecom cables.

Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this visual fault locator is perfect for field personnel detecting faults in fiber optic cables.
This VFL Kit features the following:

• Includes adapter for 1.25 mm LC connectors
• 650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
• Universal connector accommodates 2.5 mm ferruled connectors, such as FC, SC, and ST connectors
• Has three different modes: Continuous wave, pulsing, and slower pulsing mode
• Works in OTDR dead zones and is used for end-to-end visual fiber identification
• Light and portable pen-style design is perfect for on the go use
• 60 hours of battery life powered by two AAA batteries (included)

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Low-voltage and high-tech, the Klein Tools VDV Coaxial Explorer Plus Tester helps professionals get the job done. It is designed to test continuity in coaxial cables. The tester also provides cable status with bright LED indicators.

The Milwaukee Voltage Detector can be used for residential, commercial and industrial applications. The 2200-20 is a rugged tool with the highest safety rating in the industry, CAT IV 1000V with a wide 50 to 1000 volt AC range. Also has a green light which is lit when battery power is available, to dramatically improve safety on the jobsite. A blinking red light and loud beeper also indicate the presence of voltage.
MANUFACTURE WARRANTY:1 YEAR LIMITED WARRANTY

Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits.

Milwaukee Magnetic Meter Holder mounts the Digital Multi-Meter onto ferrous surfaces for easier operation.

Milwaukee's Right Angle Attachment allows contractors to drive screws and drill holes in tight, difficult work areas. Handle up to 235 in-lbs of torque. The compact design measures only 2 inches wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4" hex drive accessories.

The Milwaukee Laser TEMP-GUN™ Thermometer is a heavy duty pistol grip infrared thermometer for professional, residential, commercial and industrial applications. With a temperature range of -20 to 932°F, a 12 to 1 distance to spot ratio and a K-Type thermocouple for contact temperature, the new unit provides a safe and accurate way to measure surface temperature for a wide variety of applications.

This product is no longer available, however it has been replaced with: 12:1 Infrared Temp-Gun™ (2268-20)

Replaces M12™, M18™, V28®, and 9.6V - 28V Incandescent Bulbs - LED replacement for most work lights. 3X Run-Time - Increased efficiency for all work lights, 50,000-Hr. LED - Lasts over 250X longer than 18V incandescent bulb, Impact Resistant - Solid state light element does not fail when dropped. Compatible with Milwaukee® M12™, M18™, V28®, and most other major power tool work lights.