Toggle mobile menu
FREE! 2021 CALENDAR
The OTDR 800 is the newest handheld OTDR from Ripley’s ODM® brand that provides test technicians and contractors with an all-in-one solution for testing optical reflection and loss in fiber networks.
The Marker-Mate Electronic Marker Locator (EML-100) is designed to locate buried electronic markers, including Tempo OmniMarker™ and UniMarker™ models at industry standard frequencies. With the updated capability of detecting nine different electronic marker types simultaneously, when in “scan” mode (power, European power, water, sanitary, telephone, fiber optic, gas, cable TV, non-potable water). Select Spike Marker ModelSELECT OmniMarker II MODEL
Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.
Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.
Voltage Tester The Fluke Networks® C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.
Voltage Tester The Fluke Networks® C9973 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present. Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC.
The PD Series® All-Purpose Utility Meters are phasing voltmeters designed to replace numerous other meters (Please view pictures)that feature a single range and/or perform a single function.INCLUDES
The PD800W Cordless Phasing Tester accurately and easily operates in multiple applications including phasing, voltage detection, phase sequencing and phase angle indication. INCLUDES
Bierer's Hi-Pot meter is designed to perform a preliminary milliamp leakage test on URD cable.INCLUDES
Compact, lightweight locator allows for easy onehand operation. The LCD display and function keys....
Wand Signal Receiver Compact, lightweight locator allows for easy onehand operation. The....
Locate any energized conductive path - iron, steel and copper water lines, gas lines, tracer wire by plastic pipe, telephone/TV cables, copper and aluminum wire, conduit, power lines and Duct Hunter™ Traceable Rodders.
The 17-300R has an ergonomic design for one-hand operation and highly visible display. Features depth indication....
Jameson 14-169, to locate underground pipes or conduit, use Sonde with Jameson's Buddy Rodders and Fish Tapes or Duct Hunters Traceable Rodders. An adapter is used to attach the rod to the Sonde.This Locating Sonde operates at 512 HZ, has a 1/4" - 20 female thread, and includes a 1.5V "N" cell battery.
The Locating Sonde and Adapter Kit works with a duct rodder to trace underground pipes and conduit. The kit includes an adapter (#9-169) and a sonde (#14-169).
Digital transmitter energizes conductive paths and supports Jameson's receivers. Includes low frequencies for direct connect long runs, higher frequencies for tracing Duct Hunter™ rod in plastic pipes or inductive modes.
1/2" ROD DIAMETER/ .375" CORE
Dimensions: 47.5" x 44" x 20"