GMP 10901 is the Replacement Blade for Cable Sheath Slitter
Part #s: GMP10900 & GMP10923

Works with cable from 1/2" to 4". Ratchet design is safer for both user & cable compared to sheath knives. Also effective on innerduct. The slitter comes with a plastic case and includes stripper tool, 1 replacement blade, Allen wrench & plastic shim for small diameter cable.

CONDUX offers two sizer of the Stripper/Slitter for easy and rapid preparation of round cables from .18 (5mm) up to 1.42"(36mm) in diameter and 8 AWG up to 500kcmil.

GMP 82720 Figure 8 Jacket Slitter
The smooth, plane-like shaving action of this simple tool lets you quickly remove the polyethylene covering from the jacketed messenger on figure-8 cable without hitting the strand or damaging the cable

• The tool's wooden handle has a metal cutting guide and steel blade at one end
• the guide's special design assures that you'll cut to the correct depth every time
• Replacing the hardened steel blade is just as easy: release two screws in the quide, change blades, and re-tighten the screws
• Replacement Blade Part # 82721

GMP 82721 Figure 8 Jacket Slitter Replacement Blade
The smooth, plane-like shaving action of this simple tool lets you quickly remove the polyethylene covering from the jacketed messenger on figure-8 cable without hitting the strand or damaging the cable

• The tool's wooden handle has a metal cutting guide and steel blade at one end
• the guide's special design assures that you'll cut to the correct depth every time
• Replacing the hardened steel blade is just as easy: release two screws in the quide, change blades, and re-tighten the screws
• Replacement Blade Part # 82721

All you have to do is hold the block of the slitter parallel to the strand and draw it along the cable and strand Fiber Optic Web Slitter for .160 in. (4 mm) jacketed messenger dia. This self-guiding tool makes sure the blade pierces the web and not the sheath or strand jacket. The cutting blade is held with one screw and reinforced with a square washer to prevent bending. The tool is zinc plated to resist corrosion.

Dura-Line HT SLITTER LONGITUDINAL SHEATH

Mechanical Innerduct Slitter is designed to reduce the effort required to longitudinally slit long sections of both High Density Polyethylene (HDPE) and Medium Density Polyethylene (MDPE) innerduct and conduit that have an outside diameter ranging from 11⁄4" (32 mm) to 2" (51 mm)

Condux Innerduct Slitter 08012925

The Innerduct Slitter is designed for fast, safe cutting of innerducts from 1" (25 mm) to 2" (51 mm). HDPE Slitter.1.25"-2.0"Range.

INNERDUCT SLITTER CONDUX 08013100

Replacement blades for the TurboSlitter™ from Condux, a cordless drill attachment that can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.

Condux Innerduct Slitter REPLACEMENT BLADES for 08013101

Jonard CableSaber™ AST-200 Cable Slitter

The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

This mid-span cable slit and ring tool also features the following:

• Adjustable blade depth up to 5.5 mm (0.216”)
• Precision steel blade will cut through the toughest materials
• Blade can be set to be longitudinal for slitting or radial for ringing
• For use on cables 4 mm-28.6 mm (0.157”-1.125”) in diameter
• Aluminum shaft provides tremendous stability while slitting or ringing, preventing spiraling from occurring
• Shaft housing acts as a handle, providing greater leverage while slitting for convenience while ringing
• Thumb screw allows blade depth to be adjusted quickly by hand
• Rugged anodized aluminum and steel construction for maximum durability

JONARD RST-RB25 - REPLACEMENT BLADES FOR RST-8514

• Replacement Blades for RST-8514 Riser Slitting Tool
• Blade material is SK-5 for long life
• Sold in packages of 25

SAFECUT KCJ-XC Microduct Cutter/Slitter
Slits microduct use with ring cutter.

Replacement Blade CONDUX 08013001 (fits both sizes) offers two sizer of the Stripper/Slitter for easy and rapid preparation of round cables from .18 (5mm) up to 1.42"(36mm) in diameter and 8 AWG up to 500kcmil.

Pack of 25 Replacment blades for the GMP model B Web Slitter (GMP 82730)

The Ripley MWSS 400 Messenger Web Slitter & Shaver is a dual function tool designed to
first remove the cable messenger by slitting the web, then shave the residual web material
leaving a smooth surface on the cable jacket. Uses a CB 229 replacement slitter blade.

The Ripley MWSS 500 Messenger Web Slitter & Shaver is a dual function tool designed to
first remove the cable messenger by slitting the web, then shave the residual web material
leaving a smooth surface on the cable jacket. Uses a CB 209 replacement slitter blade.

The Ripley MWSS 700 Messenger Web Slitter & Shaver is a dual function tool designed to
first remove the cable messenger by slitting the web, then shave the residual web material
leaving a smooth surface on the cable jacket. Uses a CB 226 replacement slitter blade.

The Ripley MWSS 800 Messenger Web Slitter & Shaver is a dual function tool designed to
first remove the cable messenger by slitting the web, then shave the residual web material
leaving a smooth surface on the cable jacket. Uses a CB 228 replacement slitter blade.

Ripley US15-7001 Large Format Cable Slitter
A versatile tool cable of performing slit, ring, and spiral cuts on cable diameters from 10 to 50 mm. Equipped with a hardened steel blade, the tool provides fast, safe, and precise jacket removal from both hard and soft insulated cables without damaging the underlying layers.

TurboSlitter-Cordless Drill Attachment CONDUX 08010220

The TurboSlitter™ from Condux can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! Available in two styles, pneumatic and cordless drill attachment. The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.


Can be used with a standard drill

Lightweight shear head for easy one-hand control

Replacement blades for the TurboSlitter™ from Condux, a cordless drill attachment that can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.
Condux TurboSlitter REPLACEMENT BLADES 08010203]