Condux 18108000/R Aerial Cable Puller for 1/4" & 5/16" Strand (Currently Unavailable)
Currently Unavailable - An alternative is the Lemco PT-596
Condux 18108000/R Aerial Cable Puller for 1/4" & 5/16" Strand
Pull multiple cables easily and safely prior to lashing. Cables attach to qucik-connect links and pulling eyes that swivel during pulling to avoid tangles and possible cable damage. A spring-loaded strand brake holds the unit in place when pulling is stopped and tension is reduced. The brake releases when tension is increased and pulling is resumed. CONDUX 18108000/R USED
Overlash Cable Block Condux 18403010 *USED/REFURBISHED*
Overlash plastic cable block 1.25" in diameter with plastic frame and plastic rollers. Overlash cable blocks go over an existing cable bundle up to 3" in diameter and support one or two 1.25" diameter cables or innerduct. Built-in cable retention system allows placement and removal from ground.
*USED/REFURBISHED*
Overlash Aerial Cable Pullers Condux 18308000/R
Used-Refurbished CONDUX 18308000 / Designed to pull up to 4 new cables over existing bundles. The Jackson Tool Overlash Aerial Cable Puller, manufactured by Condux, uses large high-impact plastic rollers that roll easily and safely over existing bundles of up to 2.75" (70 mm) in diameter. Cables attach to quick-connect links and pulling eyes that swivel during pulling to avoid tangles and possible cable damage. Possible LEMCO PR965 substitute *
CONDUX 18308000 USED
90° Quad Corner Block 1.25" Rollers Condux 18101910 *USED/REFURBISHED*
Condux 18101910 90 degree Corner Cable Block with 2 Plastic rollers 1.25" wide and 2 plastic rollers 7/8" wide with Steel Frame.
With a bend radius of 22.25" (565mm). these corner blocks feature a welded and painted steel frame with angular and vertical reinforcements. Plastic rollers are durable and lightweight. Adjustable rubber idler arms retain cable in position.
*USED/REFUBISHED* Out of Stock
Linemen 1050 DCD 61400/R No Case or Lanyard
OUT OF STOCK
The refurbished Lineman™ Lasher is the pull type cable lasher for tough jobs, especially in dusty, wet or icy conditions. Use it to lash single or multiple cables up to 3" outside diameter and for single and double overlashing. You won't get snagged in trees and tight places with the Lineman™ Lasher because of the smooth, tapered cowl. Transfer time around poles is cut by as much as one-third, with the wire quick release trigger mounts below the handle for easy, one-hand engagement and release for continuous lashing.
Refurbished (90 day warranty)
USED
DCD Eagle Cable Lasher DCD 61700/R No Case or Lanyard (Currently Unavailable)
OUT OF STOCK
The refurbished Eagle Cable lasher was designed and 21st century cable lashing jobs. Sized to install CATV or Fiber optic cables. It's lightweight, durable and simple. Since it's introduction four years ago, the design has proven itself on the strand, from the Arctic Circle to Asia Minor. With a bundle capacity of 2-1/4" or single cable up to 2". The Eagle lasher will single or double lash most last mile or FTTH installations.
Refurbished (90 day warranty)
USED
K Lasher No Case or Lanyard DCD 61500/R
The DCD 61500-000 Model K 400 pull type Lasher handles just about any size lashing job. Use it to single - or double-lash a single cable up to 31/2 outside diameter and multiple cables up to a combined outside diameter of 4 5/8". Perfect for overlash
Refurbished (90 day warranty
D Cable Block and Lifter GMP 72680 *USED/REFURBISHED*
D Cable Block - Supports aerial cable to 2 3/4" (70 mm) dia. Heat- treated aluminum alloy frame. Oilite bearings on sheave. Strand hooks have steel inserts on bearings surfaces. Bi-directional locking lever.
*USED/REFURBISHED*
GMP C-1 Cable Lasher GMP C-LASHER/R No Case or Lanyard [Currently Unavailable]
The repaired C-1 cable lasher is perfect for lashing smaller diameter aerial cables to bare supporting strand with stainless steel lashing wire. The design is suited for new construction or up to it's full 1-7/8in capacity. No suitable for overlash
Repaired (90 day warranty) Refurbished units do not come with a Case or Lanyard
USED
GMP G Cable Lasher GMP 10500/R
OUT OF STOCK
The largest of the GMP Cable lashers, this refurbished unit is designed to lash large single or combination of aerial cable up to 5in. Diameter to a supporting strand. Can be used for new installs or with cables in place. Nominal spacing between wraps is 16 1/2in.
Refurbished (90 day warranty)
USED
Impact Wrench Ingersoll 5/8" Rand IR8062 *USED/REFURBISHED*
Ingersoll Rand IR80625/8 inch Super Duty Electric Impact Wrench.Quick change 5/8" hex chuck. With all the power and high quality features of the IR8055, this wrench has a 5/8" hex chuck that is machined hard for extra heavy bolting jobs.
Ingersoll Rand Electric Impact 8062 5/8 Quick release chuck
REFURBISHED Telsta Impact wrench
90 Days Waranty
*Limb & Wire Raiser - Lay Up Stick Head Jameson WR1 *USED/REFURBISHED*
The Wire and Limb Raiser is a versatile multipurpose tool to help you avoid aerial obstacles. This tool attaches to any of our fiberglass poles to help you place cable on rollers during line construction or move tree branches out of the way of aerial lines. Plated steel wire raiser is designed for placing cable on rollers, construction blocks and hardware during line construction. Conveniently pulls or lifts branches out of dense foliage. No adapter needed. Not for use on or near live wires.
LIMB & WIRE RAISER FOR JE, FG, LS SERIES.
Does not include pole.
*USED/REFURBISHED*
CX CR Crimp Tool Ripley-CR 211/R
CR 211CX CR Crimp Tools
CR Crimp Tools
Features For CATV, MATV and STV type cable connectors
Precision quality alloy steel jaws are self-bottoming and will not over-crimp
Toggle action delivers correct crimping force
Rugged components for long, trouble-free performance.
USED