Jonard’s Nut Drivers have a full length hollow shaft, making them a great tool to use on stacked circuit boards and long bolts/studs. Our Nut Drivers feature the following:

• Internal shaft flanges to prevent the handle from slipping
• Ergonomically designed handle with thermoplastic rubberized grip for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• This product complies with ASME B107.110 and ANSI standards

Groove Sizes:

JONARD MS-316 - 2.9 mm-6.8 mm JONARD MS-336 - 7.9mm-11.0mm JONARD MS-526 - 10.2 mm- 18.2 mm

Jonard's Cabinet Slotted Screwdrivers are made with an S2 steel shank and a chrome finish for exceptional strength and long life. Our Cabinet Slotted Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Cabinet Slotted Screwdriver complies with ASME B107.600 and ISO 2380 standards

Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
Our Phillips Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Phillips Screwdriver complies with ASME B107.600 and ISO 2380 standards

JONARD SDP-2 - SCREWDRIVER PHILLIPS #2 X 4"

Phillips Screwdrivers are made of special alloy steel for exceptional strength, long life and corrosion prevention. Phillips Screwdrivers are precision machined for that perfect fit. Soft rubber handles offer comfort and greater torque. The end of the handle is marked to identify the tool's size, and the tips are magnetic. Meets applicable ASME/ANSI specifications.

Jonard's Cabinet Slotted Screwdrivers are made with an S2 steel shank and a chrome finish for exceptional strength and long life. Our Cabinet Slotted Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Cabinet Slotted Screwdriver complies with ASME B107.600 and ISO 2380 standards

Jonard's Stubby Cushion Gripped Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
The screwdrivers in this set feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Slotted screwdrivers tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• These screwdrivers comply with ASME B107.600 and ISO 2380 standards
• Overall Length of each screwdriver is 3 1/2" (89 mm) each

The Jonard Tools P key (also known as a skeleton key) is designed to work with Channell locks and other similar pedestal locks. It can be used on many popular pedestals and opens most heavy duty spring-lock cabinets.
This P key features the following:

• Made of high quality brass for increased durability
• Small frame to be stored easily on a keychain for convenience

Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
Our Phillips Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Phillips Screwdriver complies with ASME B107.600 and ISO 2380 standards

The Jonard Tools 6-in-1 Multi-Bit Screwdriver eliminates the need for multiple tools in your belt. This tool can be configured to 6 types of driving heads: #1 & #2 Phillips Head, 9/32" & 3/16" Cabinet Slotted Head, 5/16" & 1/4" Nut Driver Head.
This screwdriver features the following:

• Can be used for Phillips and slotted fasteners plus nuts and bolts as it includes 2 screwdriving bits and shaft is used as a nut driver
• Made of special alloy steel with polished finish for exceptional strength and long life
• Shaft is corrosion-resistant and magnetized to hold bits and fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This screwdriver complies with ASME/ANSI standards

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Four tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 1” (25.4 mm) for a great range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s slip joint pliers are made of carbon steel with a black phosphate finish and are heat treated for maximum strength and durability.
These slip joint pliers feature the following:

• Machined gripping teeth on jaws to provide non-slip grip
• Two jaw positions with smooth, positive interlock between halves for comfort and versatility
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on ACSR or other steel cables
• Side-cutting blades on jaws cut wire with ease

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Six tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 1 3/4” (44 mm) for a broad range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.
Our adjustable wrenches feature the following:

• Precision formed knurled worm gear for smooth operation
• Extra wide jaw capacity makes this wrench ideal for bigger jobs
• Ergonomically designed vinyl-dipped wide handles for greater comfort
• English and Metric scales on each side of the wrench to allow for faster adjustments
• This product complies with ASME B107.8-2003 and ASNI standards

Jonard Tools FT-6 Flaring & Insertion Tool is designed to facilitate the expansion of cable. This flaring tool is the perfect tool for spreading COAX cable jackets, which allows easy insertion of F connectors.
Features

• Perfect for use on polyethylene jacketed, plenum, tri-shield, and quad-shield RG6 cables
• Alleviates the bunching of aluminum foil behind the connector, providing easy F connector installation
• Made of heat treated carbon steel with a black oxide finish for maximum durability and cold weather functionality
• Flaring end of tool is used for RG6 and Quad RG6 Cables
• Insertion end of tool is used for RG6, RG59, and RG11 F Connectors

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Seven tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 2 1/4” (57.2 mm) for a great range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

The Jonard Tools UST-100 COAX stripping tool is designed to strip RG59, RG6, RG6 Tri & Quad Shield, N48, RG7, and RG11 coaxial cables for quick and easy termination.
This COAX stripping tool features the following:

• Included blade cartridge (UST-205) provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

The Jonard Tools UST-150 cable stripping tool is designed to strip RG59, RG6, N48, RG6 Tri & Quad Shield coaxial cables and unshielded twisted pair jackets for quick and easy termination.
This stripping tool features the following:

• Included cartridge (UST-215) provides a 2-level strip for F, BNC, and RCA Coaxial cable termination and the other side of the cartridge removes jackets off various (CAT, CAT5, CAT5e, CAT6) unshielded twisted pair cables
• High carbon steel blades last over 5,000 strips
• Cable stop on one side of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

Jonard’s long nose and side cutting pliers are made of heat treated chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These long nose and side cutting pliers feature the following:

• Ability to grip small wires and parts in tight spaces
• Knurled and serrated jaws for maximum grip side cutting blades
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

The Jonard Tools UST-125 COAX stripping tool is designed to strip RG59 & RG6 Standard, Tri & Quad Shield, N48, RG7, and RG11 coaxial cables for quick and easy termination.
This COAX stripping tool features the following:

• Included blade cartridge (UST-225) provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

The Jonard Tools UST-500 cable stripping tool is designed to strip COAX, Network Cables, and Telephone Cables for quick and easy termination.
This universal stripping tool features the following:

• Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips on each side
• Cartridge is reversible for ambidextrous use
• Adjustable stripping hole is used to strip CAT3/4/5e/6/6A PVC and Plenum network cables
• Cutter is included to cut all types of cables
• Separate stripping slot included for stripping flat telephone & 4P/6P style cable
• Hook and loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.
Our adjustable wrenches feature the following:

• Precision formed knurled worm gear for smooth operation
• Extra wide jaw capacity makes this wrench ideal for bigger jobs
• Ergonomically designed vinyl-dipped wide handles for greater comfort
• English and Metric scales on each side of the wrench to allow for faster adjustments
• This product complies with ASME B107.8-2003 and ASNI standards

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters feature the following:

• Specifically designed for coax cables with steel center conductor
• Tested for over 25,000 cuts on CCSC (copper clad steel center) conductor cables without degradation of cutting edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel or ACSR type cable

Jonard’s curved long nose pliers are made of heat treated carbon steel for maximum strength and durability.
These curved long nose pliers feature the following:

• 70° bend angle to provide maximum visibility while working in confined spaces
• Knurled jaws for sure wrapping and looping
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s curved long nose pliers are made of heat treated carbon steel for maximum strength and durability.
These curved long nose pliers feature the following:

• 60° bend angle to provide maximum visibility while bending and forming fine wire in confined spaces
• Inside jaws and jaw edges are polished to prevent wire nicking
• Handles are spring-loaded for automatic opening
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

JONARD JIC-2288 - PLIERS, DIAGONAL CUTTER 8"

High Leverage Diagonal Cutter - JIC-2288. Crafted for heavy-duty wire cutting and made from chrome vanadium steel designed for strength and cutting ability.

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• Crafted with an angled head for heavy-duty wire cutting in confined spaces
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• High leverage design for superior cutting ability
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• 0.045” stripping hole, crusher, and two V-shaped stripping notches on the edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

The Jonard Tools UST-185 COAX stripping tool is designed to strip dual and quad shield mini coaxial cables for quick and easy termination.
This mini COAX stripping tool features the following:

• Included blade cartridge (UST-230) with cable stop provides a 2-level strip for Belden, Commscope, Times Fiber, and other mini COAX cables
• High carbon steel blades last over 5,000 strips on each side
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 1/4" of shield and dielectric, which exposes the center conductor

Jonard’s lineman’s pliers are made of heat treated chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These lineman’s pliers feature the following:

• Ability to cut easily through bolts, nails, ACSR, and many gauges of high strength wire
• Cross hatched knurled jaws to ensure a tight grip
• Rivet design to ensure smooth movement and eliminate side-play
• Thick plastic dipped handles (~0.07”) for increased comfort and reduced vibrations while cutting

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters feature the following:

• High leverage design for superior cutting ability
• Shear-type jaw for easily cutting through aluminum, copper, and 100-pair 24 AWG cable
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel or ACSR type cable

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters, also known as Banana Cutters, feature the following:

• Designed to cleanly cut up to 3/4” hard line coaxial cable and larger fiber cables without compressed or frayed ends
• Eliminates cable distortion during prep by functioning like a tube cutter
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel cables

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.
Our adjustable wrenches feature the following:

• Precision formed knurled worm gear for smooth operation
• Extra wide jaw capacity makes this wrench ideal for bigger jobs
• Ergonomically designed vinyl-dipped wide handles for greater comfort
• English and Metric scales on each side of the wrench to allow for faster adjustments
• This product complies with ASME B107.8-2003 and ASNI standards

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• 0.030” and 0.045” stripping holes, crusher, and two V-shaped stripping notches on the edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters feature the following:

• Curved jaw to provide superior holding for a cleaner and more concentric cut
• Shear-type jaw for easily cutting through up to 100-pair 24 AWG cable
• Unique locking mechanism allows simple unlocking of handles by pressing them together
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel or ACSR type cable

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters feature the following:

• Designed to cleanly cut up to 1” hard line coaxial cable and larger fiber cables without compressed or frayed ends
• Eliminates cable distortion during prep by functioning like a tube cutter
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on ACSR or other steel cables

Jonard's Cushion Gripped Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life. The screwdrivers in this set feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Slotted screwdrivers tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• These screwdrivers comply with ASME B107.600 and ISO 2380 standards

Kit contains:

• SDSP-2 Phillips #2 Stubby
• SDP-1 Phillips #1 x 3"
• SDP-2 Phillips #2 x 4"
• SDP-3 Phillips #3 x 6"
• SDSC-14 Slotted 1/4" Stubby
• SDC-3163 Slotted 3/16" x 3"
• SDC-144 Slotted 1/4" x 4"
• SDC-5166 Slotted 5/16" x 6"

The PATENTED Jonard Tools Fixed Design Long Compression Tool is designed for use on long style F connectors, such as the PPC EXXLWS Aquatight or EX-XL connectors. The tool is ideal for installing CATV network cables.
Features the following:

• Rotatable head to accommodate various connectors such as RG6 and RG11 quickly and easily
• Made of durable high carbon steel with a black oxide finish
• Plastic grips provide a comfortable and ergonomic experience
• Fixed design so no adjustments are needed

Jonard’s Nut Drivers have a full length hollow shaft, making them a great tool to use on stacked circuit boards and long bolts/studs. Our Nut Drivers feature the following:
Nut Driver Set - 7 Piece 3/16", 1/4", 5/16", 11/32", 3/8", 7/16" & 1/2".
These are full length hollow shaft nut drivers intended for working with long bolts. They are designed with cushion gripped ergonomic color coded handles. Handles provide greater torque and user comfort. Overall length 7".

The Jonard Tools CC-2721 Cable Caddy keeps cable spools organized and easily accessible. This caddy facilitates the transportation and storage of spooled products in a wide range of spool sizes and is made of 7/8” (22 mm) diameter tubular steel. Features the following:

• Folding mechanism for easy storage
• Sturdy steel construction with dual leg chains for increased stability and longer life
• Portable and compact design to make it easy to store and move around job sites
• Able to hold cable reels weighing up to 100 lb (45.4 kg) and measuring up to 17” (43.2 cm) wide and 20” (50.8 cm) in diameter
• Easy setup by just placing cable caddy on the floor, removing the cotter pin, and loading the reel
• Slip-resistant rubber feet to prevent the caddy from slipping while also protecting floors from damage

The Jonard Tools PATENTED and award-winning FOD-2000 Fiber Optic Drop Cable Slitter simplifies the slitting of drop cable jackets at mid span or end sections and is perfect for FTTH technicians working with flat fiber drop cables.
This drop cable slitter features the following:

• Designed to slit 0.250” flat drop cables as well as various other cables such as Super Essex Communications Series 6U, 6T tonable, W7, W7 tonable, 6U 24F, and 6T 24F tonable flat drop cables
• Slits flat cables 0.305" to 0.350" wide and 0.155" to 0.185" high, typically found in Corning SST-Drop flat cables with a jacket thickness of 0.03” to 0.04”
• Slits both sides of the jacket simultaneously, allowing easy access to fiber or strength members
• Can separate the jacket and strength members from the buffer tube leaving fiber undamaged
• Two reversible blades come preassembled and can be reversed when worn for double life
• Replacement Blades (FOD-RB25) can be purchased separately
• NSPE New Product Award (See below in Downloads section)

Jonard Tools FT-2075 Outer Conductor Flaring Tool is specially designed to flare outer conductors on Eupen 7168, A7168, and CommScope CA519 75 Ohm corrugated copper cable.
Features

• Ergonomic screwdriver-like handle for more comfortable gripping and easier flaring
• Made of high carbon steel with a black oxide finish for maximum durability

The Jonard Tools Dual Short and Long Compression Tool is designed for use on both short and long style F connectors, such as the PPC EX6 and PPC EX6XL connectors as well as most RG11 connectors. The green side of the plunger is for short style PPC EX6 connectors and the blue side is for long style EX6XL connectors. The tool is ideal for installing CATV network cables.
Features the following:

• Dual Head design: Green for short Style F connectors, Blue for Long F style connectors. To change: Pull to remove, rotate and reinsert
• Rotatable head to choose from RG11 or RG6 connectors
• Made of durable high carbon steel with a black oxide finish
• Plastic grips provide a comfortable and ergonomic experience
• Fixed design so no adjustments are needed

The Jonard Tools TTB-6 Barrel Lock Plunger Key is designed to unlock Channell LK03029817 and Highfield 93180775-S CATV barrel locks quickly and easily. It only works with these 2 types of locks with inside diameters from 0.176" to 0.196" (do not try to use for other purposes as it will not work).
This barrel lock plunger features the following:

• Made of high carbon alloy steel for heavy-duty use and engineered for superior tamper resistance
• Smooth plunger and heavy-duty spring designed for high strength and durability plus the tool is serialized for extra protection
• Designed only for the CATV barrel locks mentioned above, does not work with other locks including those for electric and gas meters

Jonard Tools CC-5442 Cable Caddy keeps cable spools organized and easily accessible. This caddy facilitates the transportation and storage of spooled fiber optic, copper, and other cables in a wide range of spool sizes, and can hold up to two 12" (30.48 cm) diameter reels simultaneously.
Features:

• Holds up to two 12" (30.48 cm) diameter cable caddies simultaneously weighing a total of 100 lb (45.4 kg)
• Sturdy steel construction with dual leg chains for increased stability and longer life
• Portable and compact design to make it easy to store and move around job sites
• Able to hold a single cable reel weighing up to 100 lb (45.4 kg) and measuring up to 20” (50.8 cm) wide and 17” (43.2 cm) in diameter
• Easy setup by just placing cable caddy on the floor, removing the cotter pins, and loading the reels
• Slip-resistant feet prevent the caddy from slipping while also protecting floors from damage
• Folding mechanism for easy storage

The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

The Jonard Tools RC-600 Ratcheting Cable Cutter is designed to cleanly cut copper (up to 600 MCM), aluminum (up to 750 MCM), and multi-conductor cable.
This cable cutter features the following:

• Made of heat-treated carbon steel with induction-hardened cutting edges for maximum strength and durability
• Unique design allows you to hold and cut cables quickly and easily
• Spring-loaded mechanism on handles for automatic opening
• Ergonomically designed handle with cushioned rubber grip for greater comfort and torque
• This cable cutter is not designed for use on ACSR or other steel cables

• Achromatic lens offers excellent imaging and integrated laser filters provide a safe experience (not intended for use with illuminated fibers)
• Coaxial illumination provides clear view of connector face and fiber
• LED light for longer battery life
• Includes cushioned nylon case and three AAA batteries, microscope also has rubber cover for protection
• CE certified to EU standards

The TK-822 Professional CATV Communications Tool Kit features a complete set of tools for your CATV/VDV needs. This robust kit features tools for cutting, stripping, testing, crimping, compressing, gripping, and managing COAX cables and connectors.
Kit includes

The TK-450M CATV/Telecom Installers contains the basic service tools essential for equipment installation, repairs and cable preparations. Whether it's Fiber Optic, Coax, or Copper, this versatile kit contains the perfect tools for today's technician.
Kit includes

• High carbon steel circular blades cut through HDPE or other similar materials with ease
• Makes circular cuts in fiber optic ducts and tubes up to 2" (52 mm) in diameter
• Ergonomic handles provide extra leverage when ringing fiber optic ducts
• Carbon Steel construction provides high durability and long life

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• Extra long 6” shaft and 9” overall length for greater reach

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• 6” overall length for easy portability and storage

Designed for use on 7/16” F connectors, nuts, and bolts, this combination wrench makes tightening and loosening quick and easy. This combination wrench features the following:

• Ratcheting box-end has a 15° angled head to keep hands away from work
• Ratcheting box-end also offers 12 points of contact to provide maximum torque
• Wrench-end has a 15° offset to allow easy access to connectors, nuts, and bolts
• Made of chrome plated chrome vanadium steel for maximum strength and durability

Designed for use on 7/16” F connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

• Perfect for stripping 2 mm-3 mm fiber jackets off of fiber optic cables without damaging the fiber
• Coil spring reduces hand fatigue when using the tool for extended periods of time
• Conveniently located bending holes makes wire looping quick and easy
• Black oxide coated for corrosion resistance
• Cutting edges are hardened, tempered, and ground for superior cutting and stripping

Designed for use on 1/2” connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-100).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cartridge is reversible for ambidextrous use
• Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

Designed to be used on 7/16” hex shielded F connectors, this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.
This security shield tool features the following:

• Can be used with a torque wrench for precise torque adjustments
• Perfect for use on SS-1D and EZ-NLS security shields and NSS Notch-Trap sleeves
• Machined and heat treated steel with black oxide finish for maximum durability
• Knurled handle for secure gripping
• Steel loop included for better leverage and easy storage

• Compact design allows you to reach connectors in hard-to-reach places
• Knurled handle provides a secure grip while using the tool
• Steel loop can easily attach to a carabiner or key ring and can be used to facilitate removal or installation of connectors
• Made from a high carbon steel alloy with a nickel-plated finish for maximum durability

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (31.75 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Designed for use on tamper-proof cross-connect cabinets, MESA closures, and CATV closures, this security wrench is the perfect tool to use when dealing with 5/16” hex tamper-proof fasteners.
This security wrench features the following:

• Recessed at both ends 1/4” deep for versatile use
• Plastic dipped handle for greater comfort

• 12" overall length allows you to reach BNC connectors in hard-to-reach places
• Ergonomically designed handle provides increased comfort and leverage
• Made from a high-quality materials for maximum durability and long life

This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-125).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Compatible with all our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

• 12" overall length allows you to reach connectors in hard-to-reach places and head size is 7/16"
• Ideal for use with both F and BNC connectors
• Ergonomically designed handle provides increased comfort and leverage
• Back of the handle an insertion device to assist in making connections
• Made from high-quality materials for maximum durability and long life

Designed for heavy duty use with an ergonomic handle, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance.
These scissors feature the following:

• Free fall hinge engages blades at last third of the blades, reducing hand fatigue
• Loose enough to allow fingertip operation
• One blade has a serrated edge that holds wire in place for cleaner cuts
• Notched to strip 18-20 AWG and 22-24 AWG wire with ease
• Scraper and file located on back of blade for convenience
• Nickel-plated for corrosion resistance

Designed for heavy duty use with an ergonomic handle, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance.
These scissors feature the following:

• Ergonomic handle provides increased comfort compared to standard scissors
• One blade has a serrated edge that holds wire in place for cleaner cuts
• Scissor-run design is perfect for cutting Kevlar® and wire
• Notched to strip 18-20 AWG and 22-24 AWG wire with ease
• Scraper and file located on back of blade for convenience
• Nickel-plated for corrosion resistance

Designed to cut microducts cleanly and straight, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm (9/16") in diameter.
This microduct cutter features the following:

• Made from polypropylene with thermoplastic rubber (TPR) grips for maximum grip and comfort
• Heat treated stainless steel blade cuts through ducts with ease
• Cuts tubing up to 14 mm (9/16") in diameter

This is a 4 piece replacement blade set for the CC-120 COAX Center Conductor Cleaner.
This replacement blade set features the following:

• Includes (2) V-notched and (2) straight-edge cleaning blades
• Blades are made from a rugged polycarbonate material for longer life
• Blades can be easily replaced by removing and retightening 4 easy access screws

This 5-piece Pocket Alignment Tool Kit contains a selection of the most popular non-conductive tools for aligning and adjusting components.

Kit includes (1) each of the following:

• AT-3112 Spudger - Designed with a tapered point on one end and a screwdriver-like tip on the other, these spudgers are perfect for guiding, probing, or separating wire bundles and fine computer wire terminals without damaging them.
• AT-3767 Trimpot - Designed with a 0.050" hex key on one end and a 3/32" long screwdriver-like tip on the other, these trimpots are perfect for adjusting, calibrating, and fine-tuning electronic circuitry.
• AT-6241 Alignment Tool - Designed with 1/4" and 5/32" flatheads on either end, these alignment tools are perfect for aligning or removing most variable capacitors, coils, and resistors without damaging them.
• S-389 Orange Stick - Designed with a tapered point on one end and a screwdriver-like tip on the other, these orange sticks are perfect for cleaning electrical components and separating contact points, fine wires, and other delicate components.
• JIC-22035 Probe Pick - Designed with an L-shaped wire hook extension on one end and a 3/16" wide flat notched end on the other, this probe pick is perfect for guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks.

This alignment tool kit is ideal for customers that want to align tools using a spudger, trimpot, alignment tool, orange stick, or probe pick.

Designed for use on various locking terminators, this terminator tool makes it easy to access ports between trap shields.
This terminator tool features the following:

• 4 1/2” length with a 2 1/2” shaft and 1” diameter handle - this tool provides easy access to hard-to-reach places
• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

Designed for use on various locking terminators, this terminator tool has an ergonomically designed handle for enhanced grip and superior leverage.
This terminator tool features the following:

• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

Designed for use on 1/2” connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented speed head allows easy access to connectors, nuts, and bolts
• Ratcheting box-end has 12 points of contact to provide maximum torque
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed for use on 7/16” F connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.
This speed wrench features the following:

• Patented speed head allows easy access to connectors, nuts, and bolts
• Ratcheting box-end has 12 points of contact to provide maximum torque
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed for telecom and electrical applications, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” diameter and for other objects as well.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• High carbon stainless steel blades for maximum strength and durability
• Two stripping notches included for stripping 18-20 AWG and 22-24 AWG wires
• Dual component nylon and Santoprene™ grip for greater comfort and ergonomics
• Adjustable screw underneath hinge cap to configure blades to your needs

• 50 HRC stainless steel construction for precision stripping and enhanced durability
• Ergonomic curved handle design is naturally comfortable to hold and reduces hand fatigue
• Coil spring reduces hand fatigue when using the tool for extended periods of time
• Conveniently located bending holes makes wire looping quick and easy
• Includes cutting holes for 8-32 and 10-32 threaded screws

Designed to cut copper, aluminum, leather, plastic, and other materials, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” in diameter.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• Wire stripper accommodates 12 AWG, 14 AWG and 18 AWG (2.0, 1.5 and 1.0 mm2 cross sectional area) wire
• Dual component polypropylene (PP) and thermoplastic rubber (TPR) grip for greater comfort and ergonomics
• Includes a safety locking mechanism and adjustment screw for convenience
• Not for use on stainless steel or other hardened/heat treated metals

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Built-in wire stripper has a slot for stripping the outside jacket of four wire "quad" cables and another for 22 AWG wire
• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (32 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Designed for use on Viewsonics 2 and 3 prong terminators as well as other locking terminators, this terminator tool has an ergonomically designed handle for enhanced grip and superior leverage.
This terminator tool features the following:

• Prongs designed for Viewsonics 2 and 3 prong terminators
• Tip is designed to keep out foreign debris
• Compatible with: Gilbert Engineering GTP (Morlock), PRC (Production Products Company), LFT, PCT (International Technology), TPG, TR 75 GTL (Viewsonics), SV-LT and SV-LTA (Signal Vision) locking terminators, NO-3-Pedlock, NO-4-Pedlock pedestal locks
• Shaft is made of chrome vanadium steel for maximum durability

• Strips insulation off of cables that are 1/8”-3/8” (3.2 mm-9.6 mm) in diameter
• Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
• Safely strips insulation without damaging inner braids, foils, or conductors of cables

Loading a protection sleeve onto a fiber can be tedious, even for the most experienced technicians. Plus, if they have physical impairments such as poor eyesight then it can become nearly impossible. Designed to make loading protection sleeves onto fiber quick and easy, the PSI-15 Quick Sleever® tool is ideal for aligning fiber to the holes of protection sleeves and is a real timesaver. This protection sleeve insertion tool features the following:

• Conical fiber feed surface guides fiber directly to protection sleeve (patent pending)
• Facilitates fiber loading by providing a guide for the fiber to load right into the protection sleeve
• Holds up to 15 protection sleeves, each ranging from 1.57" to 2.36" (40 mm to 60 mm) long
• When one sleeve is loaded and removed, another automatically falls into place
• Compact and lightweight design for easy storage and portability
• Remember to sleeve it before you cleave it!
• Please see our application note here detailing how to use this tool while you are splicing fiber
• Our PSI-15 won the 2020 Cabling Installation & Maintenance Silver award for innovation! (See below in Downloads section)

Two tools in one, the TTS-716 combines a trap wrench with a security sleeve tool to make it the perfect combo tool for all standard traps and all sizes of security sleeves.
This combo tool features the following:

• Security wrench fits all metal 7/16” hex “F” fittings
• Lightweight body is made of aluminum for high durability
• Security socket is made of hardened steel for longer life
• Anodized blue for easy identification and added protection

Designed to be used on 9/16” hex shielded F connectors (RG11), this security shield tool is perfect for use with torque wrenches to lock security shields onto connectors.
This security shield tool features the following:

• Can be used with a torque wrench for precise torque adjustments
• Machined and heat treated steel with nickel-plated finish for maximum durability
• Knurled handle for secure gripping
• Steel loop included for better leverage and easy storage

Designed to slit and ring fiber optic cables from 1.2 mm to 7.5 mm (0.05” to 0.3”) in diameter, this cable slit and ring tool is perfect for slitting and ringing cables, buffer tubes, and jackets on fiber optic cables.

This cable slit and ring tool features the following:

• Blade depth is easily adjustable
• Spring-loaded design for easy operation
• V block is reversible to hold smaller (1.2 mm to 3 mm diameter) or larger cables (3 mm to 7.5 mm diameter)

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 20 in-lb (2.26 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 20 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors and can also be used on bonding hardware
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 40 in-lb (4.52 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 40 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.
This tool features the following:

• Built-in wire stripper with two slots: one for stripping the outside jacket of four wire "quad" cables and the other for 22 AWG wire
• Security key insert (SK-51632) has a double-ended hex adapter for 5/16” and 5/32” pin-in-head security fasteners
• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (32 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

Designed to clean away excess dielectric material from the center conductor of distribution or trunk cables, this cleaner is perfect for cleaning center conductors without nicking or scratching the conductor’s surface.
This cleaner features the following:

• Made from high strength glass-filled Lexan material for maximum strength and durability
• Blades are made from a rugged polycarbonate material for longer life
• Can be used on any hardline cable to clean its center conductor
• Comes with a set of flat blades installed and includes an additional pair of saw-tooth blades
• Replacement Blades: CC-4 (sold separately)

Designed with a cam style locking terminator tip for use on Corning Gilbert style terminators, this tool is perfect for use on the Gilbert NS-5762-3 or other similar types of terminators.
This locking terminator tool features the following:

• Works perfectly on Gilbert NS-5762-3, NS-5762-9, NS-5762-11, NS-5762-13, and NS-5762-15 terminators
• High quality anodized aluminum construction offers long life and durability
• Compact 5” length makes it easy to work in tight spaces

• Cleanly terminates and trims wires in 110-style cross connect blocks as well as 110-style wall jack modules
• Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N) terminate 22-28 AWG (0.08 - 0.34 mm2) solid or stranded wire
• Combination Hook/Spudger stored in the chassis
• Color coded body is half yellow (cut side) and half blue for ease of use
• Enlarged blade storage compartment for easy storage
• Tested up to 100,000 cycles at high impact setting, ensuring long life during use
• Compatible with all our EPB-series blades and other similar brands (sold separately)

Designed for 7/16" F connectors, this speed head torque wrench skips over the corners of nuts and bolts so no repositioning of the tool is required.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Acts like a ratcheting wrench to allow continuous turning of nuts and bolts
• Ergonomically designed with an angled head and cushioned grip for maximum leverage and comfort
• Calibrated to 20 in-lb (2.26 N-m) to consistently meet most manufacturers' recommended torque requirements for their F connectors
• Audible click indicates when the connector is fully torqued to 20 in-lb
• Made of high carbon steel with a black oxide finish for maximum durability
• Lifetime Warranty

Featuring an ergonomic cable splicing knife and electrician’s scissors in a comfortable leather pouch, the TK-400 Splicer’s Kit is the perfect compact tool kit for cable splicing needs.

This product is a replacement blade set for the RST-8514 Riser Slitting Tool. This replacement blade set includes (25) replacement blades. The blades are made of SK5 steel for high durability and long life.

Designed with a cam style locking terminator tip for use on Corning Gilbert style terminators, this tool is perfect for use on the Gilbert NS-5762-3 or other similar types of terminators.
This locking terminator tool features the following:

• Works perfectly on Gilbert NS-5762-3, NS-5762-9, NS-5762-11, NS-5762-13, and NS-5762-15 terminators
• High quality anodized aluminum construction offers long life and durability
• Long 9” length makes it easy to work in hard-to-reach spaces

Designed for stripping 18-28 AWG / 20-30 AWG / 26-36 AWG wire, this adjustable wire stripper is the perfect tool for stripping wires quickly and easily.
Features:

• Built-in adjustment dial makes changing the strip gauge quick and easy
• Adjustable stop allows the operator to strip wire at specific lengths from 0.039" to 2.0" long
• Lightweight and compact design weighs only 1 oz and measures 3.9" long
• Hardened steel blade cuts wire with great precision
• Can be heated up to 100°C in water for sterilization purposes
• ST-450 , ST-500 , ST-550

With two 7/16” hex sockets and included LC & LG and LB & LS Slam Keys, this kit is the perfect tool for opening LB, LS, LC, and LG outdoor pedestals.
This kit features the following:

• Includes: 7/16” Star Key Can Wrench (SSK-716), Slam Lock Star Key for LB & LS Pedestal Locks (SSK-85), and Slam Lock Star Key for LC & LG Pedestal Locks (SSK-75)
• Compatible with all our SSK star keys (SSK-70 to SSK-90) and our SSK P Key Insert (SSK-90)
• SSK-716 has two 7/16” hex sockets, 1 1/2” deep on either end, which can be used to open enclosures that require a 7/16” socket

Designed with a 35° beveled edge and 6 mm wide carbide blade, this fiber optic scribe is the perfect tool for scribing optical fiber. This scribe features the following:

• 6 mm wide carbide steel blade can cleave large diameter fiber and miniature rod-shaped lenses
• Durable anodized aluminum housing provides a comfortable and durable grip
• Ideal for “scratch & pull” technique of scribing fiber

This product is a pack of 25 reversible replacement blades for the FOD-2000 Fiber Optic Drop Cable Slitter.

Designed to reach shielded F connector fittings with a preset torque of 30 in-lb, this right angle swivel torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Security shield is permanently attached and pivots in 90° increments
• Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click indicates when the connector is fully torqued to 22 in-lb
• Made of high carbon steel with a black oxide finish for maximum durability
• Lifetime Warranty

Designed with two open-ended wrench heads and an oval hole for turning pole steps, this Bell System Type wrench is perfect for telecom and datacom work applications.
This lineman’s wrench features the following:

• Large end of the wrench accommodates 5/8” and 3/4” bolts to NEMA standards
• Small end of the wrench accommodates 3/8” bolts, 1/2” bolts, and 1/2” drive screw heads to NEMA standards
• Faces of the wrench openings are offset to provide handle clearance

This Fixed Design Short Compression Tool is designed for use on short style F connectors, such as the PPC EX connectors. The tool is ideal for installing CATV network cables.
Features the following:

• Rotatable head to accommodate various connectors such as RG6 and RG11 quickly and easily
• Made of durable high carbon steel with a black oxide finish
• Plastic grips provide a comfortable and ergonomic experience
• Fixed design so no adjustments are needed

• Easy to use: Place the transmitter into the wall and the receiver will draw you to the exact location of the transmitter from the other side. Then, simply mark the wall and drill the hole.
• Accurate to within half an inch and can be used up to four feet away
• Kit includes: transmitter, receiver, (2) 9V batteries, tack adhesive, instruction sheet, and carrying case

Designed for use on LC and SC simplex and duplex connectors, this tool is perfect for inserting and extracting fiber optic connectors in high density patch panels.
This tool features the following:

• Bent nose jaws can be used to insert or remove simplex or duplex LC and SC connectors
• Works with LC and SC simplex and duplex connectors as well as with MU, MT-RJ, and other similar type connectors
• Spring-loaded design with dual component thermoplastic rubber TPR grips for maximum comfort and control
• Rubber protected jaws safely secure and grip connectors without damaging them

This is a two pack of replacement blades for the AST-200 CableSaber™

• Precision steel blade will cut through the toughest materials and ensure no damage to the internal fibers
• Suitable for both slitting and ringing applications

• L-shaped hardened steel guide and blade guard are specially designed to allow the tool to slit open jackets while protecting the buffer tubes and fiber inside the cable
• The slitter blade is located at the top of the tool, has 1/4” of the blade exposed, and is held in place by the 3/4” L-shaped steel guide (longer guide than the JIC-4377)
• The Ringer portion of the tool is located on the back of the handle and uses a spring steel cable holder to hold the cable in place. This holder also has a sliding metal tensioner to increase the force on the cable and help ensure the jacket is cut all the way through
• Ringer can be used on 3/16"-1/2" (4.7 mm-12.7 mm) diameter cables and cuts through plastic, rubber, or fabric insulation sheathing with 0.031” (0.787 mm) or 0.018" (0.457 mm) thickness

• Blade can be fixed in the slitting or ringing positions using the swivel lever
• Blade height can be adjusted for precision stripping from 0 - 3 mm
• Hardened steel blade slices through hard jackets and tubes with ease
• High polymer construction for long life and durability
• Compact design is perfect for on-the-go use

• Patented stripping mechanism strips smoothly and efficiently every time
• Strips insulation off single and multi-stranded wires and can strip multiple wires of the same gauge simultaneously
• Strip length can be adjusted manually up to 15 mm (0.591")
• Wire cutter cuts wires as large as 14 AWG cleanly and easily
• Ergonomically designed to minimize hand fatigue during prolonged use
• High-quality laminated carbon steel stripping blades last over 30,000 strips and the tool has a life expectancy of over 150,000 uses

Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-125 Fiber Connector Cleaner provides exceptional cleaning performance on 1.25 mm ferrules in recessed fiber optic adapters or individual LC and MU connectors.
This fiber connector cleaner features the following:

• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors.
This fiber connector cleaner features the following:

• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

Featuring patent-pending Slide-Guide™ technology that provides stable and consistent cleaning performance, the FCC-300 universal fiber connector cleaner is the perfect tool for cleaning a large variety of fiber connectors.
This connector cleaner features the following:

• Automatic “Clean and Advance” tape technology provides a fresh cleaning surface after each swipe, eliminating waste and guaranteeing long tool life
• Cleaning and tape advance occurs in either direction, only one swipe is needed to clean the connector end-face
• Works on both Simplex or Duplex fiber applications and supports both PC and APC end-face designs
• Compact, hand-sized unit can be used for over 500 cleanings
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

Designed to facilitate telecom and datacom installations, these glow rods are the perfect tool for pushing and pulling cables in low light applications.
These glow rods feature the following:

• Six standard 5’ long glow rods can be assembled to a full 30’ long
• Luminescent flexible fiberglass rods glow in the dark while providing a splinter-free experience
• Steel connectors of the rods have flats to tighten down each connection for greater stability than the competition
• The steel connectors also have standard 8-32 threads, compatible with most other glow rods
• Pull strength of each rod is rated up to 500 lb

This kit includes:

• Six 5’ long x 3/16” diameter glow rods (30 ft long when assembled)
• One eyelet, ball chain, whisk, and hook attachment heads
• Reusable plastic storage tube (kit packaging)

Groove Sizes:

1.2 - 1.5 mm

1.5 - 1.8 mm

1.8 - 2.1 mm

2.1 - 2.5 mm

2.5 - 2.9 mm

2.9 - 3.3 mm

1. Select the correct groove. Each groove is marked with the recommended fiber size
2. Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
3. Close the tool making sure lock is engaged and pull

Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-120 Fiber Connector Cleaner provides exceptional cleaning performance on individual MPO connectors or ferrules in recessed fiber optic adapters.
This fiber connector cleaner features the following:

• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• Can be used for over 500 cleanings and has a visual indicator to see how much cleaning material is left
• Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
• Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M

• Blade locks in several positions to make longitudinal cuts for end stripping, spiral cuts for end and mid span stripping, and circular cuts for jacket removal
• Black adjustment knob allows you to set the blade at precise depths to cut cable jackets perfectly every time
• Grey knob rotates blade for three different slitting options: ring, spiral, or longitudinal
• Can cut through a variety of jacket materials such as PVC, rubber, PE, and many more
• Spring-loaded cable holder allows tool to hold cable sizes from 3/16" to 1 1/8" (4.5 mm-29 mm) in diameter
• Ergonomic handles allow you to easily open the tool to insert cable

• Lightweight and narrow body can access closely spaced and surface mounted cables
• High carbon steel blade slices through any type of FTTH cable
• Factory-fixed blade requires no adjustments when working with different diameter cables
• Easily replaceable blades can be purchased separately (RST-RB25 replacement blades, pack of 25)

• Tapered interlocking tubes extend up to 18 ft (5.58 m) and collapse to a mere 33 ft (0.84 m)
• Constructed from a high density fiberglass material with a polyester resin-baked enamel coating for maximum durability and resistance to splintering
• Telescoping action is considerably stronger than coil or other rod-based products allowing greater control and accuracy. Simply pull and twist to lock it in place.
• Reach: average standing reach of 24" (with user's height and arm length)
• Includes: C & K hooks (to help grab/push cables), adapter (to replace the platform for navigating tight spaces), and small carrying pouch

• RDC-35 C Hook
• RDK-5 K Hook
• Compact Navigation Adapter
• Small Carrying Pouch

A technician's Service Kit designed for maintaining telecommunications and data communications networks.

Kit Contains:

• EPD-914 Punchdown Tool
• 66 Blade with & without cutter
• 110 Blade with & without cutter
• CST-1i Cyclops UTP/STP Cable Stripper
• FL-2000 LED Flashlight with Zoom Lens
• JIC-22035 Probe Pick Spudger
• JIC-22148 Combo Crimper Long Nose Plier
• SD-61 6-In-1 Screwdriver
• ES-1964ERG Ergonomic Electrician Scissor
• H-75 Molded Pouch.

• This cable slitter features the following:
• Fixed jaws and ratcheting feature make it easy to grip and slit heavy-duty cables
• Slits and rings cable made of PVC, PE, rubber, and other jacket materials
• Replaceable double-ended blade has an adjustable cutting depth of 0 to 5 mm (0” to 0.20”)
• Blade is made of steel plus ground and heat-treated for a razor-sharp edge and long term durability
• 10 mm, 20 mm, 30 mm ruler marked on tool for accurate and precise slitting lengths
• Perfect for mid span or end cable slitting and ringing

• Unique blade penetrates duct walls up to 5 mm thick, allowing you to make mid-span window cuts in cables and ducts
• Fixed jaws and ratcheting feature make it easy to grip and slit heavy-duty cable & cut into ducts at midspan
• Slits and rings cable made of PVC, PE, rubber, and other jacket materials
• Replaceable double-ended blade has an adjustable cutting depth of 0 to 5 mm (0” to 0.20”)
• 10 mm, 20 mm, 30 mm ruler marked on tool for accurate and precise slitting lengths
• Perfect for mid-span or end cable slitting and ringing

The TK-83 COAX Tool Kit features the CTF-300 Compression Tool for short F connectors and is designed for repair and maintenance of CATV cable networks. This is the perfect service tool kit for any CATV technician working with short F connectors.
Kit includes

Designed to cleave either 900 µm buffered or 250 µm coated fiber, this fiber cleaver’s quick and easy three step operation is perfectly suited for mechanical splicing and quick field termination of fiber connectors.
This fiber cleaver features the following:

• Leaf spring scale is ruled to allow accurate and precise cleave lengths from 2 to 20 mm (0.079” to 0.79”)
• Ultra-strong carbide blade will last up to 6,000 cleaves before needing to be replaced
• Handles both single and multi-mode fibers with 125 µm cladding
• Replacement Parts: FC-4 Replacement Blade and FC-65 Replacement Leaf Spring

The Ferret Plus, designed and engineered by Ferret Tools, features the world’s first-ever non-contact voltage detector to help identify live cables from a greater reach than ever before. Based on the award-winning electronic design of the original Ferret, the Ferret Plus is perfect for someone who loves having the latest technology with all the bells & whistles.
The new premium Ferret Plus is:

• The perfect solution for any electrician
• Engineered with new technology to bring you an App controlled variable focus lens, super-fast charge, Ferret always up viewing mode, and a right angle adaptor
• Comes with built-in (on board) memory providing the ability to record video even when out of WiFi range including inside metal ducts, underground or underwater
• It also comes with a built-in non-contact voltage detector to help detect live cables from a greater reach than ever before (for 150 Voltage or higher)
• Perfect for pulling in cabling inside enclosed spaces
• The most reliable and durable tools with the latest smart technology to help work faster, easier, and safer

Designed to perform live testing with OLT equipment, this PON Power Meter with APC connectors is perfect for use during FTTx/PON service turn-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems.

This Power Meter also features the following:

• Includes APC/FC Adapters and APC/SC Adapters to directly connect to UPC/PC FC and SC fiber connectors
• Analyzes voice, data, and video signals in BPON/EPON/GPON FTTx systems
• Concurrently measures 1310 nm Upstream Burst Signals and 1490/1550 nm Downstream Signal Measurements anywhere in the network
• Three pass, warning, and fail LED indicators to allow you to quickly assess your network's power level
• Supports 1310 nm Upstream Burst Signal and 1490/1550 nm Downstream Signal Measurements
• USB port allows quick transfer of data, and up to 1,000 measurement items can be saved at once
• Optional 10 minute auto-off can be activated or deactivated
• Shatter-resistant sleeve protects it from accidental falls or other damage
• Included software allows you to set the thresholds, transfer data, and calibrate the wavelength from your PC
• Includes: PON Power Meter, (2) APC/FC Adapters, (2) APC/SC Adapters, Carrying Case, Instruction Manual, Mini USB Cable, and (3) AA Batteries

• Includes a free rugged carrying case, the H-20!
• Fixed jaws and ratcheting feature make it easy to grip and slit heavy-duty cable jackets, including jackets made of HDPE (High Density Polyethylene)
• Works on cables or ducts at least 1 1/2" (3.81 cm) in diameter
• Easy adjustable blade depth adjusts from 1/8" - 3/8" (3.18 mm - 9.53 mm) to handle thick-jacketed cables and ducts
• Stainless steel construction with plated steel and aluminum hardware for maximum durability and corrosion resistance
• Perfect for removing thick cable jackets on large submariner power cables, large telecom cables (600 pair+), large fiber optic ducts, or other large power cables

Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits.
This voltage tester features the following:

• Non-contact low voltage detection from 24-1000 VAC identifies voltage in audio systems, cables with thick insulation, and other weak electromagnetic AC signals
• Non-contact high voltage detection from 90-1000 VAC identifies voltage in outlets, switches, circuit breakers, electrical panels, and more
• Can identify live voltage in wires and cables through insulation
• CAT IV 1000V rating for added operation and protection
• LED light and beep sound indicate that voltage is detected
• Built-In LED flashlight helps you see in dark places
• Compact and lightweight design with built-in pocket clip allows you to carry it on the go
• ETL listed and CE certified
• Automatically shuts off after 5 minutes to preserve battery life
• Powered by (2) AAA batteries (included)

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.
This torque wrench features the following:

• Provides a snug fit when used on 7/16" F Connectors
• Ergonomically designed with an angled head and cushion grip for maximum leverage and comfort
• Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F Connectors
• Audible click lets you know when the connector is fully torqued to 30 in-lb
• Made of High Carbon Steel with a Black Oxide finish for maximum durability
• Lifetime Warranty