You are here: Home > Pole Line Hardware > Drop Wire Clamps/Hooks
We found 22 results matching your criteria.
Drop Wire Clamps
Sort By:
1
1-2 Pair Drop Wire Clamp H-907n Aerial 1-2 Pair Drop Wire Clamp 907N W/NEOPRENE S/S H-907

Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. STAINLESS STEEL With neoprene.

Our Price: $0.46
6 Pair Drop Wire Clamp 960 Aerial 6 Pair Drop Wire Clamp H-960-SI-0966 w /Dimpled Shim

Used to support six pair telephone drop wire at span clamps, drive hooks, and various drop attachments.STAINLESS 6 Pair Drop Wire Clamp 960 w /Dimpled Shim,

Our Price: $0.99
CATV DROP WIRE CLAMP W/LONG BAIL ALLIED #1999 AERIAL CATV DROP WIRE CLAMP W/LONG BAIL ALLIED #1999

Used to secure messengered drop wire to drive hooks, span clamps, and various house attachments.
Offset curvature on clamp relieves strain on Support Wire.
Cup washer is used to tie off Support Wire without providing any sharp bends or kinks.
Formed from AISI 1018 Steel.
Bail wire formed from 304 Stainless Steel.
Bail length is 9-1/4".
Floro-Carbon finish provides maximum corrosion resistance.
Ideal for heavy loads. Accommodates Coaxial Drop Cable up to RG-11 Quad Shield.

Our Price: $0.51
AERIAL DROP CLAMP FOR FIGURE 8 CABLE (HIGH STRENGTH) H-2002 AERIAL DROP CLAMP FOR FIGURE 8 CABLE (HIGH STRENGTH) H-2002



Allied Bolt Part # 2002
  • Used to secure the integrated messengered wires of Figure 8 Self Supporting Cables to various house attachments, drive hooks, and span clamps.
  • Clamp grips the messenger jacket on Self Supporting Cables, which saves the installer time from having to strip the messenger jacket and pull through a dead-end.
  • Components formed from AISI 1018 steel.
  • Bail wire formed from 304 Stainless Steel.
  • Clamp is mechanically galvanized to meet ASTM Specification B695 Class 50 Type 1.



Our Price: $3.33
Fiber Optic Drop Wire Clamp H-SI-0972SBL Aerial Fiber Optic Drop Wire Clamp H-SI-0972SBL

Flat Fiber Optic Drop Wire Clamp
Part Number: SI-0972SBL
Used to strain relieve fiber drop wire
Removable
Stainless steel construction
Black finish to easily distinguish from copper drop clamps
Unique shim design firmly secures rigid fiber jackets
Accommodates fiber drop cross section of ~.310" W x .200" H, including Corning SST, Corning ROC, Superior Essex Series 6, Superior Essex Series W7 and TE fiber drop cable.

Our Price: $0.64
Bracket Mast Clamp  Pipe Range 2-4" H-SMB-40 Bracket Mast Clamp Pipe Range 2-4" H-SMB-40

Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized
Bracket Mast Clamp Pipe Range 2-4" H-SMB-40

Our Price: $27.47
Bracket Mast Clamp 1¼" - 3" Pipe Range H-J0590 Bracket Mast Clamp 1¼" - 3" Pipe Range H-J0590

Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized

Our Price: $4.19
C Span Clamp H-4044 C Span Clamp H-4044

  • Used in drop cable installations as an attachment to the strand for either accepting the bail of drop wire clamps, or for wrapping the support wire of drop cable.
  • Consists of high strength Aluminum jaws, and a specially shaped bolt with square nut.
  • Jaws are extruded from 6063-T6 aluminum.
  • Bolt and nut are formed from Grade 2 steel.
  • Bolt and nut are hot dip galvanized to meet ASTM Specification A153, Class B3.
  • Bolt is 3/8" diameter for additional strength.
  • Attaches to strand sizes ranging from 1/4" (6.6M) to 3/8" (10M).
C Span Clamp H-4044

Our Price: $0.86
Drive Ring 1-1/4" 4002 Drive Ring 1-1/4" 4002 1/2 x 2-1/16

Drive Ring 1-1/4", used for supporting wire on building walls or poles.
2-1/16 long 1/2" wide loop

Our Price: $0.29
Drive Ring 1/2" x 2-1/16" 4003 Drive Ring 1/2" x 2-1/16" 4003

Drive Ring 1/2" x 2-1/16", used for supporting wire on building walls or poles.

Our Price: $0.09
Drive Ring  7/8" x 2-9/16" 4004 Drive Ring 7/8" x 2-9/16" 4004

Drive Ring  7/8" x 2-9/16", used for supporting wire on building walls or poles.

Our Price: $0.16
E Drop Wire Clamp 9086 E Drop Wire Clamp H-9086

Used to secure telephone and CATV drop wire to wood or masonry.

Our Price: $0.08
E SPAN CLAMP H-J0024 E SPAN CLAMP H-J0024

Used in drop cable installations as an attachment to the strand for accepting the bail of Drop Wire Clamps.Tensile strength of jaws and bolt exceeds 75,000 P.S.I.Clamping range is from 1/4"(6.6M) to 7/16"(16M).Clamp is comprised of a pigtail bolt, two jaws, and a square nut.Bolt and nut are formed from Grade 2 Steel.Jaws are rolled and stamped from 1018 tempered Steel.Bolt and nut are hot dip galvanized to meet ASTM Specification A153.Jaws are mechanically galvanized to meet ASTM Specification B695.

Our Price: $1.52
Figure 8 Span Clamp H-7023 Figure 8 Span Clamp H-7023

  • Used in drop cable installations as an attachment to figure 8 cable for accepting the bail of Drop Wire Clamps.
  • Jaws are extruded and stamped from 5052 H-34 Aluminum.
  • Clamp is comprised of a specially shaped bolt, two aluminum jaws, and a square nut.
  • Bolt and nut are formed from Grade 2 Steel.
  • Bolt and nut are hot dip galvanized to meet ASTM Specification A153, Class B3.
Figure 8 Span Clamp H-7023

Our Price: $1.80
Figure 8 Span Clamp H-7024 Figure 8 Span Clamp H-7024

  • Used in drop cable installations as an attachment to figure 8 cable for accepting the bail of Drop Wire Clamps.
  • Jaws are extruded and stamped from 5052 H-34 Aluminum.
  • Clamp is comprised of a specially shaped bolt, two aluminum jaws, and a square nut.
  • Bolt and nut are formed from Grade 2 Steel.
  • Bolt and nut are hot dip galvanized to meet ASTM Specification A153, Class B3.
Figure 8 Span Clamp H-7024

Our Price: $1.07
Hook Bolt Guard Arm 1/2 x 5 3/4 J8245 Hook Bolt Guard Arm 1/2" x 5 3/4" J8245

The hook bolt guard arm bolts though the side of a wood crossarm for deadending telephone services and drops. Use with J1086 round washer.

Our Price: $3.81
House Hook 3-3/4" P H-921 House Hook 3-3/4" P H-921

  • Designed to secure CATV drop cable to the side of a subscriber's house by either accepting the bail of drop wire clamps, or by wrapping the support wire of drop cable around the screw eye.
  • Manufactured from AISI 1016 Steel.
  • P House Hooks are mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.

Our Price: $0.17
Mid-Span Clamp H-5577 Mid-Span Clamp H-5577

    Used for mid-span drop wire take-offs in one or more directions for either lashed or self-supported cable
    Will hold cable away from obstacles in the line of aerial construction
    Designed for use with "p" type or Wirevise drop hardware

    h-5577

Our Price: $3.90
Q Span Clamp H-4042 Q Span Clamp H-4042

  • Used in drop cable installations as an attachment to strand for either accepting the bail of drop wire clamps, or for wrapping the support wire of drop cable.
  • Clamp consists of a set of steel jaws, a 1/4" diameter “pig-tail” shaped bolt, and a hex nut.
  • The jaws are rolled and stamped from AISI 1018 tempered steel.
  • The bolt and hex nut are formed from Grade 2 Steel.
  • Nut and bolt are hot dip galvanized to meet ASTM Specification A153, Class B3.
  • Jaws are mechanically galvanized to meet ASTM Specification B695, Class 50, Type 1.
  • Attaches to strand ranging in size from 1/4" (6.6m) to 7/16"(16m).
Q Span Clamp H-4042

Our Price: $0.50
Rams Horn Drop Wire Hook H-5519 Rams Horn Drop Wire Hook H-5519

    • Specially shaped hook for attaching drop wire clamps or drop wires to houses
    • Constructed of high quality steel, mechanically plated
    Rams Horn Drop Wire Hook H-5519

Our Price: $0.91
ROUND WASHER 1-3/8" DIA. 9/16 HOLE H-J1086 ROUND WASHER 1-3/8" DIA. 9/16 HOLE H-J1086


  • Constructed of high quality steel, hot-dip galvanized
  • 1-3/8" DIA. 9/16 HOLE
  • can be used with J8245 drop hook for wood crossarms
  • 1000 PER CARTON

Our Price: $0.11
Service Drop Aluma-Form BSD-38 Service Drop Aluma-Form BSD-38

Banded service drop, maximum service load 1000lb.

Our Price: $3.47
   
 
1