*Anchor Tool, Drive End Wrench, Orange 1 3/8" x 7' Kelly Bar 10,000lbs, Hubbell C1021583 Orange

*Anchor Tool, Drive End Wrench 1.5" x 7' Kelly Bar 10,000 lbs Hubbell C3031064 Yellow

JONARD JIC-650 - LINEMAN BELL WRENCH

Designed with two open-ended wrench heads and an oval hole for turning pole steps, this Bell System Type wrench is perfect for telecom and datacom work applications.
This lineman’s wrench features the following:

• Large end of the wrench accommodates 5/8” and 3/4” bolts to NEMA standards
• Small end of the wrench accommodates 3/8” bolts, 1/2” bolts, and 1/2” drive screw heads to NEMA standards
• Faces of the wrench openings are offset to provide handle clearance

PISA® Anchor Rod 3/4" x 7' D75

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2 Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

PISA® Anchor Rod 1" X 7' D100

PISA® Anchor Rod 1" X 7' 36,000lb Tensile Strenght

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2MRSR Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

PISA® Anchor Rod 1" x 3' 1/2" w/Coupler D10031/2

PISA® Anchor Rod 1" x 3' 1/2" w/Coupler 36,000lb Tensile Strength

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2 Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

Klein 5118PRS Pliers, Rule and Screwdriver Holder

Pliers, Rule and Screwdriver Holder. Pockets for 7", 8" and 9" side-cutting pliers, most screwdrivers, 6' folding rules, and open end wrenches from 9/16 to 13/16. Belt connection slotted and belt width is 2in. Pocket Tool Pouch Klein 5118PRS